Finally ordered some more stuff for my truck

I ordered my wheels and tires, spindles, and 5125's this week. I ordered 17in pro comp 7028's with nitto trail grapplers in 295/70. I also ordered Camburg 4in spindles and 10in travel 5125's for the rear to go along with my 5100's up front. Now I have to decide on which combo to get 4 - 4.5in of lift in the rear. Been thinking about the shackle flip from armor tech with 1.5in shackle and 2in aal. What do you guys think?

 

I think Kevin from ATO has put a hold on the shackle flips last I saw. Something about tweaking the design IIRC. But if he's making them, that sounds like a pretty good setup for the rear. Only thing you might consider, is entirely new leaf packs, such as OME, Alcan, etc. They're spendy but smoother than factory and offer better off-road flex and ride.

 

where did you order your spindles from?

 

I ordered my spindles straight from Camburg and got a 10% discount for mentioning TacomaWorld. Talk to Jeff when you call Camburg.

 

295? Rubb-a-dubb-dubb...

 

i want pictures!

 

..... Maybe a little @ 4" of lift but trimming should fix it... I'm runnin 35's on 3" of lift!

 

I'll be running 35's on 3" of lift soon as well.

 

Cant wait to see some pics! Those are the same wheels and tires I will run after I get spindles.

 

He wont rub at 4"

 

depends on the bs on the wheel he got

 

camburg says that "largest" you can run is 285's with 4.5 bs but if he got wheels with 4 bs he should be good

 

If I have to do some trimming it is ok, I expected that. I will have my 5100's set at .85 so I should have just under 5in in the front. I've got the same backspace as 1Blkt and his fit so I should be fine. I've just got to figure out what I will do to lift the rear around 4 to 4.5 inches.

 

this is gunna look awesome

 

Got my wheels in today!!

 

Ha! Those are the same wheels I am running on my Tundra.

 

If he doesn't flex and turn at the same time, may be ok... Otherwise, I had to cut and weld the cab mount running 285's with a 3" lift. It could come down to an offset/backspace and rim width...

 

pics? i love my tundras

 

Got my tires in today!!! Just waiting on my spindles, brake lines, and 5125's. Still gotta order my leaf pack and then time to get all of this stuff on. Hope to have it all done in a couple of weeks.

 

hey, how much did you end up spending in total?..