Southern01Taco's build

That is bad!

 

Thanks

 

That is awesome. Could you do a write up on this?

 

Thanks. I actually just finished it and posted it in the 1st gen section.

 

Will definitely do that once I get an aftermarket radio.

 

So, today, I think I finally figured out my running rich problem. Last night, I was talking to my friend's step dad, who has an older supercharged 5.0 mustang, and I told him my truck was running real fat. He said that he was having the same problem and asked me how my fuel pressure regulator was hooked up. I told him that it was hooked to a boost port per the supercharger instructions. He told me that I should try hooking it back up to a vacuum only port like it was when it was stock so this morning I did and sure enough, the AFR looks alot better. It's still a little on the rich side but I ordered a smaller pulley from URD along with a new clutch so the pulley should even it out some more and I can fine tune it from there. The pulley and clutch should be here tomorrow, so I will try to install the pulley one night this week.

 

Sometimes those old guys know what there talking about

 

Damn right. That's the reason I mentioned it when I saw him.

 

Installed the smaller s/c pulley a few minutes ago. Bumped up my boost to 8-8.5psi. It also got my A/F ratio in a better range.

 

I went to the 1st annual MardiKrawl in Tuscumbia, Al. The event was put on by the Louisiana Land Krewesers, which I'm a member of. I had a blast and the park was awesome. It rained Thursday but when I got there on Friday it had already started to dry and by Saturday it was dusty. I took a few pics but none of me wheeling. Most of them are of the land. I'm waiting on some of the other guys to post up the wheeling pics that they took. Here is what I took.

























And here are a couple of me playing around on an articulation ramp.

 

Glad to hear you got your supercharger issue fixed

 

Yea me too. It worked awesome this weekend also. The power is amazing with those big tires. Oh and I finally heard what it sounds like bouncing off the rev limiter and its badass lol.

 

Here are some pictures from HP

 

Thanks bowen. I just saw all of those on mud and was about to post them. There are a few more so I'll get those up a little later.

 

Here are some more.























Edit: Forgot the group pics.

 

Looks like it was a fun trip. How'd you manage to loose both of your parking lights?

 

Lol well the first one I lost before the last Sicily trip on the interstate. The second one, I took off because I had a new set to put on but the new set was chrome background. So I popped the one that was in there apart just to see how easy it was going to be to paint the new ones. Well the new ones didn't want to come apart so I stuck them in the oven for a min. or two and then tried to get them apart and ended up breaking them. So now I need to order another set which I'm just going to nightshade them and be done with it.

 

Installed my clutch yesterday. Competition stage 3. It grabs a whole lot better than the old one. The only thing that surprised me is that the pedal pressure is lighter than the factory. It's definitely going to take some getting use to.

 

Installed my hand throttle today. I drove it around a little bit and it works pretty good. I can't wait to test it out on the trail.

 

You wanna do Razorback Rumble at Superlift in June?