dezert mobbin, Budget Ballin Build!

this is true... hmmm i wish i was at glamis dough

 

dude you should not be using harnesses without a cage!!!!!

and if you do a good roll you will wish you had the nut strap. you can always add it later though.

 

x69
i say run the stock seat belts until you get a cage.
A local fabricator told me that mounting harnesses to the floor bolts will or can crush you down during a roll from all the down pressure..

 

exactly.
or imagine the cab crushes you because the harnesses hold you in place like they should..

run your stock belts man. i know you said they wont work... why?

 

My old seats were trashed and bad so I picked up the beards for a steal! There's no room to wedge the stock seat buckle with the center console. I know I've heard the, "don't put harnesses in unless ur caged!" But I have no option at this point so 4 points will have to do. I plan on caging it, but it'll be awhile cause I have a slow income.

 

Just use a ratchet strap as a seat belt

 

Whip up an extension for the female side (side with button) so it extends up a bit

 

I thought about just running te lap belt

No room. Seat presses flush up against the center console. I may be able I squeeze the buckle through the seat where te lap harness is suppose to run through.

 

pry bar? grinder? somethin atta work!

just becareful till you get a cage man.

 

Dutch the center console for a bit. Or can u temporarily mount it kinda behind the seat, if the belt will reach far enough.

 

I dont have the nut strap in the fronts right now. Cause of the stock seat. But that's def gonna happen when I get seats for the front

 

fuck you no

 

Well I'll keep it mind. It's either 4points or no seatbelt at all.

 

no seat belt at all.. shoe string ftw

 

Oh yeah my center console is cut out on the sides next to the seats to fit the factory seat belt arms and since its next to the seat and low you cant even see it. If that is where you have the issue.

 

well you have supra seats
and he has some beard buckets that literally fit barely in with the center console

 

lol chicken shit!
i was almost fucked.. this is what happened to me thanksgiving.
i broke monday night thanksgiving in glamis, in the big dunes, at 1am, by my self, with no flashlight. broke a lower BJ and a cv axle. replaced the balljoint out there and then was immediatly stuck in 2wd in a little bowl when i got it fixed, didnt even move a inch lol. then alot of work with my 2 2ftx10ft rolls of carpet, and shovel lol.
thank god i have done the same thing as replacing the lower bj about 50 times haha.

LOL

 

so got my king bumpstops in from dam (won them on insta for free ) annddd they are fucking massivveee!! soo the plan is I'm going to sell them and use $ for rear LT parts since these are unnecessary big for rear LT



Know anyone interested?? they are 2.5 x 4"

 

hmm how much?

 

they are brand new like latterly an hour ago got them by ups, and from DSM they are $540 before shipping cost is added. so Im going to sell them for $520