PreRunner to 4x4 Build

Been on here for a while and have learned some great information so figured Id start a build page after 3 years ha.

Started off as my stepdads truck that I only drove to school and back home. Rolled it one day being young an stupid . My punishment was the title to the truck and I would have to pay for the damages if I wanted the fixed. Needless to say I left it dented and looking like shit for 2 years, joined the army as an MP and got all the dents removed and repainted while I was gone. Recently converted to 4WD also.

00 Prerunner SR5 converted to 4WD

Current Mods:

Suspension/lift/steering:
Fabtech 2.5" DirtLogics
Poly Body Mount Bushings
Rear OMD Spring Mod


Electronics/Lighting:
Morimoto D2S 3.0s
- Red Demon Eye
- Osram 4300k Bulbs
- Gatlin Gun Shrouds


Kenwood HU
Rockford T1 Components
Powered By Rockford 400/4
JL 10W7 tuned to 33 hz
Powered By JL 500/1 V2

LEDS All Around
Ultraguage
Train Horn


Tires/Wheels/Brakes:
Current:
33x13.50r15 Nitto Mud Grappler MTs
- 221,893 miles on the ODO
33X12.5X15 Nitto Trail Grapplers MTs
- Retired with 41,000 miles on em

MT Sidebiters in 15X8.0 -30mm 3.31 BS

Engine/Driveline:
Mganaflow 14"
Magnaflow Cat
K&N Intake

Misc.
5% Tint Doors
5% over stock on back
35% Windshield with 5% brow
UWS Toolbox


Future Mods:
18x12 Fuel Hostages
- 33x1250R18 Trail Grapplers

Duramax
SAS

Current as of 23APR15














Rolled it in 2010 Most expensive mistake to date lol


Waxed and Removed pinstripes





Truck went on pause for a while, joined the NC National Guard and had to finish my spring semester of 2012 to leave for OSUT form May-Oct Had a collegiate BASS tournament on Lakes Guntersville before I left for training




Graduated an MP and came home for some family time and to start back on the truck

Started with the Retrofit




Ended up losing the XB rings, and blacked out the entire housing

Windshield tinted and 5% all the way around


Lasted about 4 hours then got pulled over



Then re-wired my whole stereo system and wired in the two amps



Got parts in Jan. 2013 and finally got to installing it after 2 years of searching and looking at parts. Installed new tires the same day

Feb. 15 2013








As of Tonight! Had to test it out


MTs throw some chunks



Truck currently has 215,xxx miles on it

Hope yall enjoy! Any questions about 4x4 swap just post here or PM me and Ill help you out

 

Bad ass truck man. Looks great. I like that you ditched the pin stripes. You going to take off the nerf bars?

 

Thanks man! Yeah actually got pb blaster soaking on them right now haha Ive hated em since day one and always forget to take em off

 

How you get your wheels to stick out

 

nice rig, thank you for your service!

can u see in ur mirrors at night with 2.5% ?

 

Yeah I could barely, but now I have 35 up front and 2.5 on the back

Ordered rims with correct back spacing and 33x12.50 tires

 

is that north campus?

 

sub'd
nice truck man!
if you dont mind me asking...how much was it after installation and everything?

 

Scored transmission, t-case, and all the front end parts for about 1200 then another 300 for ball joints, all new gear oil, and misc. bolts and wires so 1500 out of pocket if i cant sell any of my old prerunner things

That it is

 

Awesome looking truck! Also thanks for your service

 

Haha nice. I used to live in copper beach. Sweet build btw

 

Copper beech is nice to, preciate it man

 

4wd Light wired

 

Where did you get the black UWS toolbox from?

 

Ordered it from Amazon
I know TAC in moyock carries them

 

nice build man

 

Truck looks awesome! Congrats on the 4WD conversion!

 

Preciate the compliments

 

Subbed...

 

Steps removed!