IDtrucks build thread
What my 96 4x4 Tacoma looks like today.
(credit to Adam (BoxRocket) for the beautiful photo)
Well now that I am on my 2nd tacoma I figured I might as well make a build thread for it. But first i must pay tribute to my last tacoma, my 1999 automatic 2.4l extended cab 5 lug, a.k.a cholo rider a.k.a mini turk a.k.a lil taco. This is a long tribute, its basically an entire build thread.
Here it is the day i bought it, a little more than 2 1/2 years ago, with 24,000 original miles.
this is the oldest odo picture i have, it is rolling over 30k
the stock grille was cracked, so in the deal the dealer agreed to give me the money for a new grille. I took that money and put it towards a billet grille
The stock wheels with hub caps didn't look fly enough, so wheels and lo pros came next
I didnt plan on lowering it when i got it, but i hated the wheel gap so i lowered it 2"
not quite that much (photo shop done by the photo shop thread)
I wanted a little bit of bass, so i put in a new deck and a 10" sub. the amp was in the cubby under the seat
After that the badges all came off, I dont have any specific pictures of that.
I spent a lot of time and work and shaved my tailgate. My build thread on that is on CT, but for some reason the pictures dont show up if you are a guest:(
what i started with
all clean shaven:D
then it got hit while parked in the street 3 months later:mad::mad:
Next i decided i was tired of riding on bump stops every time i put something in the bed, so i put on some monroe air shocks (also cut down bump stops). Install thread : http://www.tacomaworld.com/forum/1st...ir-shocks.html
i had the idea to put 4 rectangular fog lights in the front mouth of the bumper for quite a while, so eventually i decided to finally do it. Build thread: http://www.tacomaworld.com/forum/lig...t-install.html
And here ends my build for my 99'. I sold it at 38,680 miles. Im going to miss that truck a whole hell of a lot. The only reason i was able to live with my self if i sold it was because i got another tacoma that is almost identical. Ill never forget you mini turk :wave:
And here is lil taco's successor.
It is a 1996 automatic 2.7l extra cab 4x4 with 122k miles, about 5 minutes after buying it stopping to get a bottle of water and take a piss before driving it 120 miles home.
The most recent picture of it
A couple of pics from the first time off roading
I usually average about one major mod every 3-4 months, depending on how "major" the mod is and what maintenance expenses come up first. so this will probably be a fairly slow build, but i plan on keeping it for 4 more years so i will have plenty of time.
and heres a sneak peek at my first mod, soon to come.
alright, well i got the new lights^ put in. wow these things are stupidly bright. my pictures don't convey how bright these things are. i am really not sure if i can use them on the road...i might blind people. These things just shoot out light everywhere. my only concern (other than blinding people) is the plastic grille melting from the heat of the lamps
i took out the grille (massive pain in the ass) and cut out the plastic bars where the light would go, and drilled a hole in the lower plastic lip of the grille
lights bolted in
and a backside view
and on the truck during the day
just head lights
with new lights on
i finally got a TW sticker!!
I am making this the chronological off road time line of my truck.
Comprehensive Condensed Off Road Time Line
First time trying it out. Thought i was all cool off roading lol.
I did a little bit more, still enjoying my new found ability to use 4wd
Wouldn't call this off roading, but this is what I bought the truck for. Snow
I had to test out my sliders before MOAB.
Then, well, I went to MOAB.
Then with my new found off road skill I wheeled a bit of Idaho desert lava rock
I TRIED to go wheeling, but didn't make it very far...
Lets try it again. Winter wheeling with Andy
Did some more wheeling while I waited for my bumper to be done, andy got stuck again
Got a bumper, found some jeeps, and went wheeling (so did andy)
Crawled up on a jeep on 33s...
Went to MOAB again!
Taco Take over 2013
Went on a club run with Idaho 4x4 to hooker canyon
got stuck. was wedged in between 2 rocks with 2 tires off the ground and sitting on my frame
its ok, this nissan was blocking the other part of the trail too
herp derp. double winch time
Went on a night run with HDOR club
This trail was a ton of steep loose rocky hill climbs. The trail got significantly worse than the last time the guys ran it. Had to use my locker quite a few times or i would have spent a ton of time bumping stuff and hoping all over the place.
Sweet 60 series LC I was with last night
This is where the 2 door jeep broke the rear drive shaft and had wiring issues. had to winch it up this and drag it off the rest of the trail. That jeep was so useless. had zero flex, and could hardly move on its own...then broke.
The Epic WY/MT Adventure
Can i reserve one too! :o
nice build so far :thumbsup:
So whatcha goin' to do with the new truck? Any immediate plans?
Yes! Whats your first mod?
new update to build thread, bottom of post #3, so im giving it a bump. :D
What brand of lights did you put in the grill?
in preparation for moab i have a list of things i need to get built on the truck so it is ready. in 3 months i am going to have to have
a CB: Done
a 2.5" bilstein, AAL lift : Done
33" BFG A/Ts Done
rock sliders Done
bed ammo box storage Gave Up
Black derp of the wheels and grille parts Done (with wheels)
my sub put back in Done
its going to be a busy 3 months
parts for the cb have been ordered
for sig records
my pile of moab goodies that need to be installed
Where you getting your sliders from?
local fab shop :D
I installed my cobra 18 into the dash and hooked up a 4 ft firestik, and it was the most painstaking install I have ever done. It took 3 install attempts, about 9 hours over 3 days to trim and test fit and re-trim the piece of shit aftermarket plastic radio bracket and also wire, install and tune the antenna. But that was easy. But finally its in.
the antenna is mounted to the bed rail and the power wires are tapped into the radio and cig lighter fuses.
|All times are GMT -7. The time now is 05:13 PM.|