Tacoma World Forums

Tacoma World Forums (http://www.tacomaworld.com/forum/)
-   1st Gen. Builds (http://www.tacomaworld.com/forum/1st-gen-builds/)
-   -   hambone155 (http://www.tacomaworld.com/forum/1st-gen-builds/247826-hambone155.html)

Hambone155 11-08-2012 12:01 PM

hambone155
 
i purchased a 1995 tacoma in 2008 ive had the truck from 125k to now 220k i wanted to start this build post to get some feed back on what im doing. i have the 5vz-fe engine with the trd supercharger on it.
http://i166.photobucket.com/albums/u...041708_001.jpg
http://i166.photobucket.com/albums/u...092808_004.jpg

reason im doing a engine build. my number 3 cyl is loosing compression after about 1k the plug gets covered in oil.

mods ive done
deck plate
blinker move to corner lights.
lifted it
lowerd it back down
stiffer rear leaf sets

i pulled an engine from the junk yard for $220 to build it came with a power steering pump, ac compressor and alternator. for that price.
http://www.tacomaworld.com/gallery/d.../photo1142.JPG
when i pulled it i was just going to put it in and be done with it but me and a buddy pulled the valve cover off and time cover off and to my suprise it was a super clean engine. new timing belt and new water pump. cams are clean and there is not a single grind in them like my current cams.
http://www.tacomaworld.com/gallery/d...m/photo871.JPG
i decided to get the heads off and see what we were working with for pistons and cyl walls.
http://www.tacomaworld.com/gallery/d...m/CIMG0076.jpg
theres a little carbon on them but not to bad. hardly any blow by like my old engine.
http://www.tacomaworld.com/gallery/d...ercharger1.jpg

so what i am doing.
port and polish everything.
decked heads.
stock head gaskets.
stronger head studs.
getting a tiny pulley to run 13lbs eventually.

the things i need help with is fuel system. what size injectors should i run? do you think its better to do the urd upgrade to is it better to go with alot bigger injectors on the 6 stock ports?
what should i get as a tunner?

Hambone155 11-08-2012 02:15 PM

doing a top engine soak now...with some stuff, idk what it is but my tech said "its the shit"

so here the cam shaft we pulled out.
http://www.tacomaworld.com/gallery/d...m/photo872.JPG

Hambone155 11-11-2012 08:54 PM

http://www.tacomaworld.com/gallery/d...m/image283.jpg
after an engine soak. cleaned all the carbon off.

austinramsay 11-11-2012 08:58 PM

Nice! I better take that supercharger off your hands so you dont blow up your new motor ;) haha

Hambone155 11-11-2012 08:59 PM

Offer? Might turbo instead. I'm trying to run 13 lbs of boost.

austinramsay 11-11-2012 09:01 PM

Free.99? Haha i wish i could buy it but im broke :( and i need rear suspension next too :p

Hambone155 11-11-2012 09:02 PM

Spring wrap is a huge problem for me.

05taco2.7 11-12-2012 06:02 AM

this build is a joke ...



half ass hamilton






jkjk trucks pretty legit just needs a nice fat snail under the hood

Hambone155 11-12-2012 11:03 AM

^this guy is my tech, he has a tacoma and it took him for freaking ever to make a post.

DAMOS 11-12-2012 01:06 PM

I would stick with the sc on a 4x4. Especially if you already have one.

Hambone155 11-13-2012 07:08 AM

i see yours in supercharged, any mods for boost?

Hambone155 01-31-2013 08:07 AM

ttt

superswamper003 02-02-2013 08:10 AM

So what happened with this build?

Hambone155 02-02-2013 08:28 AM

i ran out of money, it happens when your getting married.

superswamper003 02-02-2013 08:39 AM

So its in pause mode or abandoned mode?

Hambone155 02-02-2013 08:41 AM

Financial hold. I will not give up on this truck.

superswamper003 02-02-2013 01:26 PM

Quote:

Originally Posted by Hambone155 (Post 6374142)
Financial hold. I will not give up on this truck.

Hell yeah man.. Get er done

Hambone155 03-11-2013 02:44 PM

i did this in about 2 hours, i broke the heads down to their components. valves, springs, retainers and keepers all out. it didnt take very long at all, it will take a ton more patiance to get them back together.
these were taken apart using a 8" C clamp and a 17mm socket, i will cut the side out of the socket to put them back in when i get the heads decked and lap the valves.
http://www.tacomaworld.com/gallery/d...th_springs.JPG
http://www.tacomaworld.com/gallery/d...dium/valve.JPG
http://www.tacomaworld.com/gallery/d...nakedhead2.JPG
http://www.tacomaworld.com/gallery/d.../nakedhead.JPG
http://www.tacomaworld.com/gallery/d...edium/1cyl.JPG

05taco2.7 03-11-2013 02:50 PM

Good to see this truck comin along so well next up LONG TRAVEL!!!!

BlackSportD 03-12-2013 09:26 AM

I heard of some V6 Camry cams, I think the 3.0, that give a little kick in the higher revs- bolt on.


All times are GMT -7. The time now is 07:44 PM.