First Gen Tacoma Spindles and UCAs.

I have a set of first gen Tacoma spindles and UCAs for sale. They come with the bearing hub and bearing attached. One of the hubs is missing one lug stud. I would replace all of them with new, longer units while it is off the truck anyway.

The spindles will fit a PreRunner or 4x4, but the bearing hub is PreRunner only (thanks Chris).



$100 OBO plus shipping. These weight about 80 pounds total, I will box them up and send via UPS. You can figure shipping here from ZIP 19348.

 

bump

 

Certainly somebody needs these.

 

Are they a direct fit for 4wd?

 

Are they abs spindles.

 

You have to knock out the axle hole covers (smack them with a hammer and they will come right out) and they will fit a 4x4. That was the plan for my truck before I sold it. I would imagine that they are ABS spindles. Is there something that I should look for to be certain?

 

Sending this FS ad to a local member here in Oregon. He may be interested in the spindles.

 

Unfortunalty it your not able to just take the covers off and use them on a 4X4. They do not have splines for the cv shaft.

 

You know what Chris, I forgot about that. You are absolutely correct. The spindles will work, but bot the bearing hubs.

Thanks, I will update the OP.

 

Get-these-things-out-of-my-garage-bump

 

deeeeeebs

 

Who are you?