FS: 1st gen front ToyTec/Bilstein coilovers $550

I have a pair of ToyTec coilovers for sale off my 97 4Runner. They will fit 96-02 4Runners, 95-04 Tacomas, and 00-06 Tundras

600lb springs and built around the beefier Tundra Bilstein 5100's. Adjustable from stock height up to 3.5 inches of lift.

They have about 20k miles on them. Includes spanner wrenchs for adjustment.

$550 shipped to the lower 48. No trades. They go for $710 plus S+H new.

 

Interested. Questions though.

-What is the part number?
-Since they are a heavier spring would they require a plate bumper and or winch?
-Do you have pictures of how it sat on your truck?
-What happened with the rears?
-Why are you getting rid of them?

 

pictures of truck?

 

Regarding Plate bumper and/or winch, I'd say no.

After I added my ARB with winch I put on the Toytec coilover kit with 600lb coils. They did not hold the bumper up very well, I took the coils off after 2 months and replaced them with King 700lb ones. In my opinion the 600lb with a low compression setting would work nicely for a stock bumpered vehicle.

 

These aren't something Toytec normally sells but the most similar setup would be this The diffrerence between those and mine is that i had them built with the Tundra 5100's rather than the Taco 5100's. The Tundras have slightly higher valving and a beefier bottom bushing.

Plate bumper is not required. Toytec normally recommend the 600lb spring rate for stock vehicles. However, they will also work great with extra weight like a bumper and/or winch. My truck has a 100lb bumper, winch, full skids, sliders, etc etc etc and still rode great with them. My new setup has 550lb springs with the same weight.

Not sure what you mean about the rear but i currently have OME 861 coils and Bilstein 5100's for a JK wrangler on the rear. Pretty happy with it so its staying how it is.

I got some different ones so i'm selling these. Absolutely nothing wrong with them.

My truck rode and flexed awesome (for IFS ) with these and i would not have gone with any higher of a spring rate. Like i said above, my new set is 550lb.

Truck is 3.5 inches in the front and 4.5 in the rear with a 2 inch body lift on 35's

 

If these are still available after christmas ill bite one em

 

Bumpage

 

Sold

 

Darn! I just saw this thread. Let me know if the sale falls through.