1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Most everything to complete a 5spd swap

Discussion in '1st Gen Tacoma Parts Marketplace (1995-2004)' started by jlandon, Feb 4, 2013.

  1. Feb 4, 2013 at 8:25 PM
    #1
    jlandon

    jlandon [OP] New Member

    Joined:
    Feb 28, 2011
    Member:
    #52038
    Messages:
    2
    Gender:
    Male
    AR
    Vehicle:
    02 Tacoma - 05 GX470
    Alright - I bought a totaled truck in order to do a 5spd swap on my guiding Taco... As miss jlandon is the main driver offroad (i take photos during trips and spot everyone) I asked her what she thought. Got the "No" stamp. Unfortunate, because I had already bought the truck and started the tear down. All parts came off of 95.5 T-100 with 3.4L 5spd.

    The truck had 249k. I had done some consultation for the kid who was driving it. Shifted fine, little slop, but felt solid. He was driving drunk and went off the road, hit a tree, rolled at least 3 times, and landed on its feet. Came out without a scratch.

    IMAG1643_a13c4f1b5cfc7f02c279e5d7ae622e33d1fd4cd5.jpg

    It drove onto the trailer after I yanked the tie-rod straight. The motor had a major valve cover leak and the speedo cable had a bad oring, so the whole thing was a bit dirty. I cleaned it up and found some paint that leads me to believe it has been rebuilt or replaced recently. When I pulled the two apart and got to look into its soul, it was surprising. Fresh looking paint marks and seals looked cleannnn.

    Now I have;
    R150 from a 3.4L T-100 with passenger side drop
    Plate that mounts on the back of the engine in front of the flywheel.
    Flywheel x2 - One that came on the truck, new one in plastic.
    Clutch assembly - Used, wouldn't hurt to replace.
    Associated everything else (pilot bearing, clutch fork, boot, etc.)
    New Slave Cylinder
    New Master Cylinder
    Clutch Pedal
    Braces from block to trans
    Associated wiring harness for 3.4L Manual w/computer


    IMAG1727_80d11c9b7f284f4993ef6e330ba905d244c59285.jpg
    IMAG1728_7223e66a13c6fb431b54006f5f03d81b6eb38ea4.jpg
    IMAG1732_4cef9240807c28e78b1b2786464660a755fb91ce.jpg
    IMAG1733_844eec1a176c340deb41c4dbda4f3a5943bb0769.jpg
    IMAG1736_6fc93411e1bf6b1ee81f3a7b6011dbb334406a9a.jpg
    IMAG1735_4e93be7eea0ed2b3ab8ba6f7ad8f2cee6cd469fd.jpg

    The bad
    - Rubber hose that goes between body and slave cylinder
    - I ripped the shifter boots when I pulled it. Here
    - The shifter seat? on the trans fell into the muddy earth and was lost. Here and Here

    I don't know what this goes for but I'll start it at
    $1000.00 OBO w/ wiring harness and computer
    $750.00 OBO w/o wiring harness and computer
    - I emphasize OBO because I'm not sure what the kit is worth?
    If you feel this is to high, please message me instead of posting in the thread. I will adjust accordingly.

    I'd much rather trade for;
    4.88 Elocked rear diff
    4.88 locked front diff
    4.88 unlocked front diff+cash
    Adjustable CO's+cash
    RTT
    4runner 5 star wheels+cash.

    64854 prefer local pickup. If in AR I may be able to deliver.
    Faster way to chat is jlandon91 (at) gmail (dot) com
     

Products Discussed in

To Top