FS: 1st Gen 95.5-04 Tacoma LED Bar Roof Mounts-SOLD

These mounts are solid, and avoid drilling any visible holes in the truck.

These require drilling into the door jamb, behind the weatherstripping. I used threaded rivets and then bolted them in, but you could use screws or regular bolts and drill a hole on the inside for a nut. Wiring can then be run down the weatherstripping and into the cab or engine compartment.
Tested and built on the 40" OKLEDLIGHTBARS.com led bar, measures 42 1/4" at widest point, housing is very similar to most other Chinese brand LED bars.
Buyer is responsible for making adjustments for your specific light bar application, unless custom size requested.
Mounts can be moved upwards or downwards on the door jamb for desired LED bar location.
Plastic Security caps provide more protection and help avoid tampering with your expensive light bar.
Includes neoprene washers for placement between LED bar and mount for added grip, mounting bolts or screws not included.
Mounts have been sprayed with duplicolor bed liner.
Also includes #eazycompany decal.

Mounts Ready to Ship:
None (build time is one week)

LED Bar Mount Designs:
"Toyota Logo" Mounts
"Toyota Devil Horn Logo" Mounts
"TRD" Mounts


Check out some more install pics on Instagram under the hashtag #eazycompany!

 

Subbed in case I trade up my current led, if these were 2days earlier I woulda bought a different bar and coulda bought some from you

 

Bad timing! Maybe we can work out something in the future.

 

Not bad, do you have a full body shot of the truck? Just curious as to how much over the roof line the bar sits.

 

subb'd for intrest in the future.. only thing is if/when i decide to order i wouldn't be able to pay via paypal you wouldn't take a personal check?

 

Hmm, subbed... Tempted to buy a set now so that if you don't make these in the future I'll still have them when the time comes....

 

Interested, just wondering if you have any pictures of the entire truck.

 

Here it is...

 

Thanks bud. I popped over to his build shortly after I asked that. I LOVE the lowpro windshield mounts. I would love to have this setup on mine. I'll have 124 hours on my next check so we will see haha

 

Subbed...

 

Very cool. I might do the same as Brent if in the future I want a roof bar. Great look and design

 

Haha I want the mounts. But I don't need to buy a light bar. I need to get some other stuff done before I buy more lights....

 

You just need to take a break from spending money haha

 

Need to, no. Should, yes...

 

I need more monies!

 

Sorry for the delayed responses, had to work late. Thanks to PcBuilder14 for copying the pics over!

No problem, we could do that.

Hopefully can keep making these if the interest is there.

Agreed, I tried to keep these as low profile as possible, and the mounts could be lowered further than how I have them mounted, but the wipers would be close..haha. My mounting spot is about as high as they can go, and the LED bar is about 50/50 with the horizontal roof line.

 

subbed. interested in the mounts in the future if you make them, again. If you do I have a different LED bar in mind to get and will contact you about it. Did you run the wiring up the door jam?

 

Cool! I already had existing holes in my roof from mounting a different bar when I drilled through the roof, so I just ran the wiring through there, but it's possible to run the wiring up the door jamb too.

 

Subbed. Those are badass.

 

Sweet I'll let you know when I'm ready to order. There's not many people who make these for first gens so you could pretty much corner the market.

I had one idea that might be good or it
Might not be lol. What about weld on brackets for those who don't want to drill holes? Again just an idea..

After thinking about it for a few seconds I guess I could just weld those brackets on.