3 inch lift and 31s?

would that look goofy? does anyone have any pics?

 

not exactly what you are asking, but should give you enough to get an idea:

2" lift with 265-70/16(approx 31" - looked awkward)


2" lift with 265-75/16(approx 32" - good proportionate look)

 

Considering 31" tires are what came on the trucks from the factory... What's the point of putting the lift on - unless you plan on putting bigger tires on?

 

3" lift and 31-10.50-15's

 

I have 33x12.50's on mine and i love it. But yeah if your gonna lift it you should get tires as well

 

very nice truck its not overdone just enough to make it look sweet.

 

I have 31x10.50x15s with daystar 2.5in kit, I really like it, I wouldn't mind bigger tires but I have a 4cyl and don't want to loose anymore power, check my gallery for pics

 

I think 3" would look good(as seen above) with 31" but may want to consider 32/33"

here is my 2.5" lift with 31"

 

did you fit the 33s with a 3 inch lift?

 

This is mine....3inches in the front and 2 in the back with 33's

 

hey mattleegee, what rims are those?

 

Procomp xtreme alloys

 

heres what mine looked like after i installed my lift, coilovers at 2.5, 2'' aal and stock 265/70/16

 

hey tankoma04 what kind of gas mileage do you get with the 33s?

 

i think trucks with 15" wheels look fine with 31 inch tires but if your wheels are are 16's or 17's then 32 inches or bigger looks better; imo of course. but then again not all tires are gonna look the same from brand to brand. i hope to get my truck lifted before the end of the month so that i can have this problem too... fingers crossed... what a money pit!

 

Looking at getting some of these tires in 33in.
Where are you rubbing?
I supposedly have a 3in lift leveling kit in the front.
(OME 881's w/.5 top plate. I don't mind trimming some plastic. I just need to make sure it's not rubbing the UCA.

 

Tire/Fender clearance.

 

x2, no point, unless your going for looks. I had my 33's on with no lift for about a month, with some rubbing. Now with ~2" of lift there is only rubbing on the frame at full lock and on the rear fender when the rear tires are stuffed.

 

nice trucks

 

keep in mind with 33's you will want to regear to compensate for the power loss. 32's are just about right. I have a 2.5 in bilstein lift in the front and I'm going to be adding a 1.5 in AAL in the rear when it arrives in the mail. Also will be switching from my 265/70/R16 to 265/75/R16 BFG AT