V LEDs blinkers help typ 2

Hey guys I just got some new led front blinkers from V led and I had to run a power wire from the running lights to power the white LEDs and when I hit the blinker the white goes off and amber comes on and then back to white when done blinking. BUT!!! Every time I hit the brakes the white lights go off. I have a led relay so I know it's not that. I need help!!!

 

u need to replace the brake lights with leds the reg filament bulbs cause a jump in the system

 

That's the thing I DO and I'm getting the volt spike so they think I hit the blinker. Are there any other ways?

 

I do already have led brake lights

 

So I took off my tail lights completely and it is steal will happen.

 

Ok I spent 4 hrs trying dif stuff on the wiring I ran a hot drop wire from my back blinkers (led) and hit the brakes and they shut off and I ran a ground just for both the brake lights (led) to the frame and they whent off. This is so dumb.

 

http://www.customtacos.com/forum/showpost.php?p=1717705&postcount=38
hope that link helps