MAF Sensor

flesheatingvirus · 07-03-2008, 08:17 AM

Ok, this could be a dumb question. I've noticed that a way to check your MAF is to unplug it with the engine running. Then the engine shouldn't run smoothly, correct? That is how it worked on several other vehicles I've tried it on. When I unplug it on my 96 Tacoma, the engine dies. Is that normal?

roxspin72 · 07-03-2008, 08:44 AM

I once tried to have my kid press on the throttle pedal whiile inspecting the throttle body opening. But, even though the MAF was pluged in, the Intake was not connected to the TB, so my truck would not start up.

So my guess would be that the MAF must be connected for you truck to run.

humanoid · 07-03-2008, 08:53 AM

Why not just get a volt meter and check the readings?

luk8272 · 07-03-2008, 02:08 PM

On my moms 03 Toyota van when I unplugged the MAF it shut off the van.

07-03-2008, 08:17 AM	#1
flesheatingvirus Junior Member Joined: Jun 2008, #7570 Location: Middle TN Posts: 18 1996 2.4L 2WD Xtended Cab 1996 Automatic 2.4L 4CYL	MAF Sensor Ok, this could be a dumb question. I've noticed that a way to check your MAF is to unplug it with the engine running. Then the engine shouldn't run smoothly, correct? That is how it worked on several other vehicles I've tried it on. When I unplug it on my 96 Tacoma, the engine dies. Is that normal?

07-03-2008, 08:44 AM	#2
roxspin72 Enjoying my addiction Joined: Feb 2008, #4659 Posts: 541 Speedway Blue, TRD SP/PKG #1: 4X4, 6 2008 Access Cab Manual 4.0 L Coming soon NST Pulley in mail. Sway Away front res. Coilovers, & rear shocks, w/Dakar 2.25" Leaf Pack. 4.56 Gear, TC UCA's, Diff drop. TW DS...	I once tried to have my kid press on the throttle pedal whiile inspecting the throttle body opening. But, even though the MAF was pluged in, the Intake was not connected to the TB, so my truck would not start up. So my guess would be that the MAF must be connected for you truck to run. __________________ *2008 TRD Sport 4X4 Access Cab* UNDER CONSTRUCTION Just Facing My Addiction!!!

07-03-2008, 08:53 AM	#3
humanoid My Own Alliance: Old Man Division Joined: Jun 2007, #1932 Location: Sunny SoCal Age: 40 Posts: 1,000	Why not just get a volt meter and check the readings? __________________ Yep, my baby's for sale! http://www.tacomaworld.com/forum/buy...ery-clean.html

07-03-2008, 02:08 PM	#4
luk8272 Southern Louisiana Joined: Feb 2008, #4929 Location: Kaplan, Louisiana Age: 26 Posts: 1,168 07 Silver4dr. 4x4, V6 Shortbed 2007 Double Cab Automatic 4.0 5% Tint, Bug flector, vent Visors, Removed secondary air filter, Rear Spring TSB w/ Bilstein shocks, Toytec 3" lift, Debadged, Billet Grille, 17x9 Pro comp 6001 rims, BFG 285/70/17, Fog light anytime mod, Tailgate hose clamp mod, Prodry AFE filter. Relocated Differential Breather. ABS on/off, 6000k HID heads/fogs Wanting Sliders and Exhaust!	On my moms 03 Toyota van when I unplugged the MAF it shut off the van. __________________

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MAF reset	Ridgerunner	Performance and Tuning	11	05-12-2008 08:04 PM
throttle body, MAF sensor!	EverTaco23	Performance and Tuning	2	05-05-2008 04:38 PM
URD MAF Sensor Calibrator?	hail-bop Command	2nd Gen. Tacomas	11	04-25-2008 04:43 PM
URD MAF Sensor Calibrator	AZsurfer13	Performance and Tuning	20	01-02-2008 10:37 AM
urd maf	flipkid420	Performance and Tuning	7	12-02-2007 10:05 PM