tired of hard to clean mud

[mudjunkie]

heres a very cool trick that i came up with works pretty quick and efficiently.

take a 10 foot peice of pvc pipe and cap the hose 1,2 inch pvc works great,cap the end make it really tight, drill many many tiny holes all throughout the pvc. feed the pipe over your axle and under the engine run a hose through it for about 5 to ten minutes then your done clean as a whistle works great for those hard to reach places. if you really want to get technical make holes in the pipe that will fit right behind the wheels and this will get the gunk out of the brakes and boots etc. sorry no pics no camera ask me if you have any questions.

[beastlytaco]

+1 good info.

[mudjunkie]

i was washing the truck and it just hit me i have tons of i deas like this i love thinking of mods i wish i could post some of my ideas somewhere even if i dont do them or use them

[beastlytaco]

keep em commin

[mudjunkie]

just gave you a new one

[silverback07]

I used to do the same thing but with an oscillating sprinkler. Just set it under the truck and let it go back and forth. Makes a helluva mess on the driveway though.

[mudjunkie]

take the pipe and put it on the driveway width ways let it run lol

[350TacoZilla]

another good trick is to spray a ton of armor all or tire shine on the under side of the truck before wheeling.... the mud will run right off when you wash truck off

[monoman]

Originally Posted by silverback07

I used to do the same thing but with an oscillating sprinkler. Just set it under the truck and let it go back and forth. Makes a helluva mess on the driveway though.

You see, the trick here is to do this on your lawn. Just add a little fertilizer on the grass before hand and walla, you will have a nice green lawn & have a clean truck too.....

[beastlytaco]

so the sprinkler wont harm engine componets or exhaust parts??

[mudjunkie]

same as driving in the rain or through puddles just dont do it while the truck is piping hot