Tacoma Basic Alarm Install

Anybody help me , im installing an Basic alarm Audiovox , I have figured out most of the wires except the wires that say they go to door lock outputs, it has 3 wires and it includes a relay if necessary. I dont know how to connect that it says one way to connect it or ground switched single step or 2 step door locks or 3 wire positive door locks . All i know is that the truck has negative door locks. yes my truck has power door locks
The three wires im confused with is from the alarm
Green= +unlock/lock -
Blue= = +Lock, - unlock
blue red = 2nd unlock

Heres the link to alarm install , on pages 5 and 6
http://www.voxxsupport.com/images/User%20Manuals%20-%20FAQ%27s/AX200_DOC_OM.pdf



and the wiring diagram to the truck
http://www.the12volt.com/installbay/alarmdetail/2139.html



Oh and can i connect the 12v ignition the factory radio ?

thanks guys

 

help! , i figured out all wires but the lock and unlock wires,

 

BUMP, I got the alarm working, but the parking lights flash only on the drivers side. I think i got the correct cable. Any body know the exact location to the parking lights cable on the 99 Tacoma , its supposudly green and and behind the fuse box on a white plug which i got it to.