Seat swap?

I have a 1999 with the split bench seat. Bucket seats from a 98 4runner should fit correct?

 

I doubt it...but the sky's the limit...im sure with a little fabin you can get them to work

 

I beleive some older model 1994-1998 toyota celica's seats fit with a hint of fab. No seat is a DIRECT bolt in. It will always require a smidge of fab. Also, Scion TC seats work.. models 2001-2005 or some shit.. Look on TToRA for more.

 

I installed seats from that year range 4 runner in mine. The mounts closest to the trans tunnel line up fine. On the outer rail, I had to swap the rear mount from the Taco seat, and once the seat was bolted down, bend the front mount down with a BFH.
Somewhat related, there was a little wear on the outer side of the driver's cushion, so I swapped the cushions between the driver's and passenger side. They are very easy to change.

 

I would try searching over on Customtacos.com there are some very knowledgable folks over there when it comes to translpants.

 

Got some help here :

http://www.tacomaworld.com/forum/1s...y-how-thread-compiled-list-helpful-links.html

 

nice post

 

4Runner seats


This rear mount has to be swapped from the Taco rail to the 4Runner rail


The front mount has to be bent down