Could someone identify this upper control arm?

I got a great deal for donahoe (icon) coilovers and unknown upper control arms.
Could some tell what brand are these UCA? Its all chrome out and i cant tell
http://www.auctiva.com/hostedimages...&formats=0,0,0,0,0,0,0,0,0,0,0,0,0,0&format=0
http://www.auctiva.com/hostedimages...&formats=0,0,0,0,0,0,0,0,0,0,0,0,0,0&format=0
http://www.auctiva.com/hostedimages...&formats=0,0,0,0,0,0,0,0,0,0,0,0,0,0&format=0

 

I think those are bling blings

 

hahaha yeah i guess the previous owner chrome them out for look

 

Im going to strip the chrome and paint it flat black

 

Look like camburgs too me..chromed..ha

 

simply based on the bushings being black and the mis alignment spacers... i'd say they're camburg UCA

 

any other thoughts about the UCA ? How do i know if the shocks need to be rebuild?

 

Look like my camburgs. But they could be icons too looking at the pic above

 

when you buy used coilovers, you should always consider a rebuild automatically as you don't know how bad they were treated by the previous owner, or how many previous owners it has gone through, etc...

 

The seller said it was icon UCA but it doesn't look anything like it

 

im so going to be broke after buying this set hahaha. I heard icon will rebuild your shocks for $60 each ? Can i run toytec springs with this set up?

 

i heard the same thing about Icon's rebuild... it's a fair price considering they do all the labor, etc... as for springs, i would stick with what they have as they are built specific to their shocks...

 

do i need to replace any bolts on the UCA ? like uni ball bolt?

 

i think it's safe to say those are not icon UCA's. the icon tube UCA for 1st gens only became available in the last year or so and icon does not sell them with the bolt and mis alignment spacers that are in the OP's pictures.

also, the icon arms have that brack line attachement bolt that on the back side of the arm, the OP's do not

like i said, they're probably camburg... doesn't really matter though as camburg, TC or icon are all good quality

 

I saw the camburg UCA they have 2 tiny bolts on the arms and this one doesn't. Im just making sure what brand it is so incase if i need any parts. What does mis alignment specs spacer do? how high can i crank this icon C/O? On the top plate it said 2.5, does that mean it only goes up to 2.5?

 

2.5 is the diameter of the CO

but yeah... you shouldn't lift a 4X more then 2.5" - 2.75"
But it will allow for more... 3.5" I think

 

Come on y'all !!!someone helps me identify these UCA please:

 

If the seller said they were icons they probably are because they look very similar to the picture above