pro comp series 7069 on tacoma?

will pro comp series 7069 16x8 wheels with 4" backspace and -12mm offset and 285/75r16 bfg a/t tires fit on my 2002 tacoma 4x4 with a 2.5 inch lift?
Not very good with rim and tire sizing so need some advice.

 

You will need to trim. Ideally you would want 3.75" BS wheels to run 285's but if you trim you might get away with minimal rubbing but at full lock you may rub the frame.

 

so how would it work if i ran 1" spacers?

 

or maybe run 275/70r16 tires? do the rims fit my tacoma good?

 

check out my build i have the 7069 with 2.5" of lift and 285/75/16's

 

So whats your overall backspace? Are your rims also 4" bs and do ypu have spacers?

 

I had the spacers on with my stock wheels, right now I'm just running the 7069's with 4" bs the stance is pretty good I think only rub a bit at full lock and bump!

 

So if i bought the 7069 16x8 with 4" bs and the 285/75r16 tires i should be fine?? Do the stock lug nuts work? I gotta make sure i buy a set that will fit given that i live in hawaii and i have to order online. Thanks for all of the advice. Means a lot.

 

They worked for me man check out my build i think im closer to 3" now with the 5100's and eibach's. you definatley need to get new lug nuts though the guys at 4wheel knew which ones i needed, i'm pretty sure they are acorn style, mine are splined. the exact wheel product code for mine is: 7069-6883

Gorilla lug nuts 12mm x 1.5" i think are the ones you want

 

Thanks for the help! Your truck is awesome!

 

I have OME 883 coils, dakar leaf pack & Nitro charger sport shocks.
Pro Comp 7069 wrapped in Kelly Safari TSR 285/75/16. I did buy new lug nuts!

 

Could someone tell me if the 15x8 (7069-5883) 3.75 BS, -19mm offset would clear the calipers? I have a '95 tacoma.

 

95.5 came with 15's so yes it'll clear the calipers.

 

Thanks. Just wanted to make sure before I drop the cash

 

How about 15x8 pro comp 7069 on a 2002 Tacoma ? Will they fit?

 

The 16x8 will fit fine with some trimming of the pinch weld. I cut the fender liner and took a hammer and angle grinder to the pinch weld. No rubbing there or the frame, but I do rub the washer fluid reservoir. I'll have to relocate that, but no biggie.

 

I have the 8069-6883 and they work fine with 285s

 

Some 15" will fit a 01-04 body style. Worst case is you'll have to grind down the caliper to clear them. I would just stick with 16".

 

Are these heels hub or lug centric? Going to slap them on my 2001 preener 4 door V6. Also thinking of spider trax wheel spacers thats why I am wondering HUB or LUG centric?

 

bump