OEM 1996 tacoma body and bed mounts

hey, i have a 1996 tacoma and it has a 3 inch body lift on it. i was wondering if theres any kit that has everything to go back to my stock height? or any other ways of going back to stock height? thanks

 

When I removed my 3'' body lift I used an energy suspension body mount/bushing kit.

 

does it come with every thing? such as hardware and stuff. and did you do it yourself?

 

Yes. I did it myself.

Its easy, just time consuming.

The energy susp kit only comes with the bushings, spacers and mount plates, you have to get hardware that is 3'' shorter than what you have now from somewhere else. I just pulled a clip, bed, and body bolt and just got some that were 3'' shorter at ace hardware. I used grade 8 hardware.

and dont forget about the steering shaft extension, gas filler neck extension, and shifter extensions if they were used.

 

alright thank you very much

 

I installed the ES body mount kit as well...
mine is combined with a 4crawler 1" BL

The the ES body mount kit is mostly complete...
you would still need purchase shorter bolts then what
was used on the 3" BL

Some hardware stores carry grade 8 bolts that may work...
or you can possibly purchase a set thru 4crawler

Below... some pics comparing the ES body mount to the oem

Energy Suspension body mount...



factory left... ES right...



why my factory body mounts were changed to the ES...