Mike "Wuzzy121". Rest in peace, brother

Go Back   Tacoma World Forums > Tacoma Discussion > 1st Gen. Tacomas

Notices

E-locker actuator

Reply
 
Thread Tools Search this Thread
Old 06-03-2013, 02:24 PM   #1
Junior Member
SurefireDBL is on a distinguished road
Law Enforcement:
Joined: Nov 2012, #91369
Location: East TN
Gender: Male
Posts: 26
SurefireDBL's Tacoma Gallery
E-locker actuator

Part # 41450-35010 E-locker actuator. Can anyone tell me what all years this # will fit? Also, I need the nuts and bolts that correspond to mount it. Are they available through one of the online OEM parts vendors?
  Reply With Quote
Old 06-03-2013, 06:44 PM   #2
Junior Member
SurefireDBL is on a distinguished road
Law Enforcement:
Joined: Nov 2012, #91369
Location: East TN
Gender: Male
Posts: 26
SurefireDBL's Tacoma Gallery
Not sure why I haven't received any responses. This is new to me. Do I need to do something else too. This happened on another post that I had too.
  Reply With Quote
Old 06-03-2013, 07:09 PM   #3
Formally afroman5015
bellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shed
 
bellassaiw10's Avatar
Army: 31B 1132 MP Co.
Joined: Jun 2010, #39032
Location: Currituck NC
Age: 22
Gender: Male
Posts: 3,724
bellassaiw10's Tacoma Gallery
further google search has verified that this part goes from 95.9-08.05... Hit up camelbacktoyota in the vendors section, Jorge can get you straight! Or go online and find a parts diagram.

http://parts.camelbacktoyota.com/par...?siteid=214329
to save you some time
  Reply With Quote
Old 06-03-2013, 07:26 PM   #4
Junior Member
SurefireDBL is on a distinguished road
Law Enforcement:
Joined: Nov 2012, #91369
Location: East TN
Gender: Male
Posts: 26
SurefireDBL's Tacoma Gallery
Thank you. I have the part already. Found a sweet deal on it. Now I just have to research the install and hardware.
  Reply With Quote
Old 06-03-2013, 08:23 PM   #5
Formally afroman5015
bellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shed
 
bellassaiw10's Avatar
Army: 31B 1132 MP Co.
Joined: Jun 2010, #39032
Location: Currituck NC
Age: 22
Gender: Male
Posts: 3,724
bellassaiw10's Tacoma Gallery
If its just the front diff actuator its literally just 4 bolts, might need some rtv for a complete seal
  Reply With Quote
Old 06-03-2013, 08:32 PM   #6
Just out for a rip are ya bud?
IDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shed
 
IDtrucks's Avatar
Name: Mark
Joined: Jun 2010, #38254
Location: Boise ID
Gender: Guy
Posts: 19,519
IDtrucks's Tacoma Gallery
Quote:
Originally Posted by afroman5015 View Post
If its just the front diff actuator its literally just 4 bolts, might need some rtv for a complete seal
title says e locker actuator...not ADD for the front.



op, the e locker motor is bolted in through the 2 long studs on the drivers side of the housing and one bolt that goes through locker actuator into the third member housing. you do not seal it when you put it on. what project are you working on?
  Reply With Quote
Old 06-03-2013, 09:38 PM   #7
Formally afroman5015
bellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shed
 
bellassaiw10's Avatar
Army: 31B 1132 MP Co.
Joined: Jun 2010, #39032
Location: Currituck NC
Age: 22
Gender: Male
Posts: 3,724
bellassaiw10's Tacoma Gallery
Quote:
Originally Posted by IDtrucks View Post
title says e locker actuator...not ADD for the front.



op, the e locker motor is bolted in through the 2 long studs on the drivers side of the housing and one bolt that goes through locker actuator into the third member housing. you do not seal it when you put it on. what project are you working on?
But the part number is for add front actuator
  Reply With Quote
Old 06-03-2013, 10:05 PM   #9
Junior Member
SurefireDBL is on a distinguished road
Law Enforcement:
Joined: Nov 2012, #91369
Location: East TN
Gender: Male
Posts: 26
SurefireDBL's Tacoma Gallery
Quote:
Originally Posted by afroman5015 View Post
But the part number is for add front actuator
Not sure where you found your info but, part # is for rear diff.

This truck was from New York originally. Therefore the frame has been replaced as of 2011 I think probably because of the massive amounts of salt and snow. I did the gray wire mod without knowing the actuator was seized. Tried to take it off and inspect and it started to crumble to pieces. I came across a used one for a nominal price and here I am.

@ID, to your knowledge, are the long studs available from the dealer? I am striking out at the online OEM vendors. As you probably guessed, I snapped one trying to take this thing off.

Thanks for the help.
  Reply With Quote
Old 06-04-2013, 07:25 AM   #10
Formally afroman5015
bellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shed
 
bellassaiw10's Avatar
Army: 31B 1132 MP Co.
Joined: Jun 2010, #39032
Location: Currituck NC
Age: 22
Gender: Male
Posts: 3,724
bellassaiw10's Tacoma Gallery
My bad guys ha still had the part number saved in my copy and paste from looking at parts, as for the bolts I think I have a PDF saved from when I did my conversion that has damn near every bolt listed
  Reply With Quote
Old 06-04-2013, 07:46 AM   #11
Formally afroman5015
bellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shed
 
bellassaiw10's Avatar
Army: 31B 1132 MP Co.
Joined: Jun 2010, #39032
Location: Currituck NC
Age: 22
Gender: Male
Posts: 3,724
bellassaiw10's Tacoma Gallery
http://www.toyotapartszone.com/Page_...onentsID=41-01

This what you're looking for ?
  Reply With Quote
Old 06-04-2013, 09:50 AM   #12
Just out for a rip are ya bud?
IDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shed
 
IDtrucks's Avatar
Name: Mark
Joined: Jun 2010, #38254
Location: Boise ID
Gender: Guy
Posts: 19,519
IDtrucks's Tacoma Gallery
Quote:
Originally Posted by SurefireDBL View Post
Not sure where you found your info but, part # is for rear diff.

This truck was from New York originally. Therefore the frame has been replaced as of 2011 I think probably because of the massive amounts of salt and snow. I did the gray wire mod without knowing the actuator was seized. Tried to take it off and inspect and it started to crumble to pieces. I came across a used one for a nominal price and here I am.

@ID, to your knowledge, are the long studs available from the dealer? I am striking out at the online OEM vendors. As you probably guessed, I snapped one trying to take this thing off.

Thanks for the help.
you snapped a stud taking off the actuator haha? how did you manage that? The motor should just pry out.

anyway, yes. the studs are available from the toyota parts counter. There are 11 studs that hold the rear third member in. 7 short ones, 2 slightly longer ones, and 2 very long studs (these ones are black) that go through the e locker motor. You will have to pull the third member to put the new studs back in the housing, but thats not hard at all. the studs just screw into the housing. I would recommend getting the studs from toyota because they are the correct length, however if you have to buy nuts and bolts get them from a screw/bolt store. toyota wanted about a dollar a piece for each nut and bolt, i got all 11 nuts and bolts in grade 8 for 2.30 from a local bolt store.
  Reply With Quote
Old 06-04-2013, 11:39 AM   #13
Junior Member
SurefireDBL is on a distinguished road
Law Enforcement:
Joined: Nov 2012, #91369
Location: East TN
Gender: Male
Posts: 26
SurefireDBL's Tacoma Gallery
Quote:
Originally Posted by IDtrucks View Post
you snapped a stud taking off the actuator haha? how did you manage that?.
I imagine its because of all the corrosion and not enough PB Blaster. I can't wait until I have this locker working.

@Afro, wondering if I have to drain all of the diff fluid for this fix? And thanks for the link you posted. I will check it out.
Is there a good write up about this fix somewhere? I found the e-locker fix thread on another site, should I just use that resource?
  Reply With Quote
Old 06-04-2013, 12:10 PM   #14
Just out for a rip are ya bud?
IDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shed
 
IDtrucks's Avatar
Name: Mark
Joined: Jun 2010, #38254
Location: Boise ID
Gender: Guy
Posts: 19,519
IDtrucks's Tacoma Gallery
Quote:
Originally Posted by SurefireDBL View Post
I imagine its because of all the corrosion and not enough PB Blaster. I can't wait until I have this locker working.

@Afro, wondering if I have to drain all of the diff fluid for this fix? And thanks for the link you posted. I will check it out.
Is there a good write up about this fix somewhere? I found the e-locker fix thread on another site, should I just use that resource?
yes you will have to drain the fluid since you need to pull the third to fix it. have you ever removed a third member? I would take the time to type it out but its easier to show you. here is a link to my build where i swapped axles. should cover the basics.

http://www.tacomaworld.com/forum/1st...ml#post6912852



basically you need to drain the diff, loosen/remove all 11 nuts from the third member, unbolt the brake lines from the hubs (crimp the brake lines to prevent fluid loss) unbolt the hub from each end of the housing with the 4 bolts holding it on. then pull the axle shafts/hub assembaly out about 4-5" (careful not to scratch the housing or splines when pulling it out) then pull the third member off the studs and set it aside. then you can put in the new stud(s), re seal it up, put the third back in, put the axle shafts back in and reconnect the brake lines.
  Reply With Quote
Old 06-04-2013, 02:04 PM   #15
Formally afroman5015
bellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shed
 
bellassaiw10's Avatar
Army: 31B 1132 MP Co.
Joined: Jun 2010, #39032
Location: Currituck NC
Age: 22
Gender: Male
Posts: 3,724
bellassaiw10's Tacoma Gallery
Quote:
Originally Posted by SurefireDBL View Post
I imagine its because of all the corrosion and not enough PB Blaster. I can't wait until I have this locker working.

@Afro, wondering if I have to drain all of the diff fluid for this fix? And thanks for the link you posted. I will check it out.
Is there a good write up about this fix somewhere? I found the e-locker fix thread on another site, should I just use that resource?
Like id said you will have to drain it and I had a link to a rebuild I found but didn't know if you had already ordered one, if give the rebuild a shot first unless you have a really good deal on one
  Reply With Quote
Old 06-04-2013, 05:06 PM   #16
Junior Member
SurefireDBL is on a distinguished road
Law Enforcement:
Joined: Nov 2012, #91369
Location: East TN
Gender: Male
Posts: 26
SurefireDBL's Tacoma Gallery
First, I really appreciate the help from both of you.

Secondly, I am not sure where I steered you all in the wrong direction. So let me clarify.
I am only wanting to fix my broken actuator. With that said, do I still need to pull out the third member in order to install the new one.
Sorry if I wasn't so clear on the matter.
  Reply With Quote
Old 06-04-2013, 05:13 PM   #17
Formally afroman5015
bellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shedbellassaiw10 is one of the sharper tools in the shed
 
bellassaiw10's Avatar
Army: 31B 1132 MP Co.
Joined: Jun 2010, #39032
Location: Currituck NC
Age: 22
Gender: Male
Posts: 3,724
bellassaiw10's Tacoma Gallery
I'm pretty sure ou can remove just the actuator but don't quote me ha here's the link I found earlier

http://rodnh.byethost12.com/tacoma/locker.htm
  Reply With Quote
Old 06-04-2013, 05:22 PM   #18
Junior Member
SurefireDBL is on a distinguished road
Law Enforcement:
Joined: Nov 2012, #91369
Location: East TN
Gender: Male
Posts: 26
SurefireDBL's Tacoma Gallery
Thanks. I have read that and I will use that as a reference.
  Reply With Quote
Old 06-04-2013, 09:50 PM   #19
Just out for a rip are ya bud?
IDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shedIDtrucks is one of the sharper tools in the shed
 
IDtrucks's Avatar
Name: Mark
Joined: Jun 2010, #38254
Location: Boise ID
Gender: Guy
Posts: 19,519
IDtrucks's Tacoma Gallery
Quote:
Originally Posted by SurefireDBL View Post
@ID, to your knowledge, are the long studs available from the dealer? I am striking out at the online OEM vendors. As you probably guessed, I snapped one trying to take this thing off.

Thanks for the help.
Quote:
Originally Posted by SurefireDBL View Post
I am only wanting to fix my broken actuator. With that said, do I still need to pull out the third member in order to install the new one.
Sorry if I wasn't so clear on the matter.
so did you snap a stud or not? Are you just not going to fix it? Maybe you are confusing terms here and are saying you snapped something you did not.

to JUST replace the motor you do not need to drain the oil or pull the third. just unbolt the whole actuator from the third and swap em.
  Reply With Quote
Old 06-05-2013, 12:04 PM   #20
Junior Member
SurefireDBL is on a distinguished road
Law Enforcement:
Joined: Nov 2012, #91369
Location: East TN
Gender: Male
Posts: 26
SurefireDBL's Tacoma Gallery
@ID, is there a stud that holds on the actuator?
  Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
E-locker not engaging no power at actuator plug Archer550 1st Gen. Tacomas 15 08-09-2013 08:14 AM
WTB: E-Locker Actuator cmj 1st Gen Tacoma Marketplace 2 05-20-2013 01:07 PM
WTB E-Locker Actuator!! ckblum Buy / Sell / Trade 0 04-15-2013 10:18 PM
WTB - First Gen Rear Locker Actuator tacomaprerunner 1st Gen Tacoma Marketplace 8 11-12-2011 01:33 AM
Anyone had the Locker Actuator go bad? RedskinRedTaco 2nd Gen. Tacomas 2 11-10-2010 12:57 PM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.