first you unscrew the door handle
pop out the two circle covers
unscrew the two screws inside the door handle
pop out the plastic clips that hold the door panel to the door frame
slide the door handle to the inside of the cab to release it from the door frame
make sure to swing away the clear/white clip from the door latch lever attached to the door handle so you can release the lever/bar from the handle
release the rest of the door panel away from the door frame
if you are completely removing the door panel from the door frame be sure to remove the electrical connectors
remove the connector that connects the window motor to the switch
push the window down to unbolt the window from the regulator
i did this to help support the window when i removed the regulator bolts..
unscrew these 6 bolts to release the motor/regulator from the door frame
install is the reverse from disassemble..