1.25" Wheel Spacers Vibrations

I got a 04 Tacoma with a 3in lift with 33s and they scrub so I put wheel spacers on now when I hit about 40-50mph my truck starts to shake ???

 

Are the spacers and all lugs torqued properly?

 

Something isn't right. I've had spacers for almost 2 years with no issues.

 

The question is what brand spacers did you get? I run Spidertrax and have no issues. At one time I ran a cheap pair I got at Pep Boys and the whole truck vibrated like hell.

 

I got some off of ebay for a little over 100$ I forgot what brand

 

what kind do you have

 

I believe so and it shaking didn't start until I put the spacers on

 

I ran those ebay spacers with no issues. You need to evenly torque them in the star pattern. I put loctite on my threads so they won't come loose. Then torque the wheel in star.

 

do you know if the spacers are hubcentric or lugcentric? sounds like they are just crappy spacers. Never had any issues with my Bora spacers.

Id check the torque on all bolts, then if it still shakes, look into a different brand

 

X2 ^^^^ Also maybe the spacers could be putting extra leverage on already worn axle bearings.

 

so you think something is loose

 

mine had a slight vibration also at 40-50 mph....i took them off a few times, re-torqued...no luck...eventually i decided to get new wheels and ditch the spacers

 

I've been running 1.5's for about 3 months mow (torqued to 80/w lock tight) and i have no issues!