led bar roof mount? !

If you get a light bar mount or basket, I would get a low profile version...so you can pass under tree limbs.

 

I just went out and measured the roof, and on my 1st gen from rain gutter to rain gutter is only 46 inches. So a 50 inch bar, with a mounting system, would stick out the sides of the rain gutter by 2 inches on each side.

Carr makes two different ones for the Tacoma (1st and 2nd gen). One is a Rota, like mine, and the other is a low profile. I think the low profile is only 2 inches above the cab when mounted.

 

I made my own! They were 45" at the widest before adding spacers to tighten up the gap! Def gonna be hard to mount a 50"! Where are you located? I could try to help!

 

Im in Alabama

 

i might be just making my own brackets

 

We offer some mounts. They are an unbent and unfinished mount but comes with reccomended bend lines.

 

If it lets me post a pic from my phone here they are

 

You're with UndeadOffroad lol

 

How much for a set?

 

This is his website

http://www.apocalypticlighting.com/LED-Bar-Gutter-Mounts_p_82.html

But you seriously probably couldn't use these with how much you need them bent. When you bend a bracket it draws the light bar closer to your roof and you would need to bend them a ton.

 

All of these 2nd gen people posting awesome LED bar mounts, but it's much more difficult for us 1st gens trying to make door jamb mounts!

I've tried to make good looking 40" bar mounts a few different times, and am working on another design right now...just need another light bar.

 

Well if you ever get something done for a 50" bar Evan let me know! Haha

 

you dont get any leaks from the bults/screws you used putting that in?

 

On my 2nd gen i just siliconed the bolts and bracket down! Haven't had a leaks yet! Mine is bolted where the roof rack mounts are at in the roof channels!