What size tire?

Yeah, so i have an 04 xtra cab 4x4 3.4L and i just bought a 3 inch toytec lift and i was just wondering if 285/75 R16 would fit without rubbing at all. And if they do, wha would I have to do to get them to not rub and what size is the biggest I could run? Thanks

 

BF Goodrich Mud Terrains KM2's by the way

 

I recently added a toytec lift too. Yeh you should be able to clear those if not there is a pinch weld on the bottom of ur fender located by the mudflap. It is covered by a protruding piece of plastic. This is where your only rub should occur. You can take a utility knife and cut the plastic away and then take a hammer and pound that pinch weld flat. This should take care of your problems. I put 33 12.50s on mine yesterday with no rub at all but the wheels didnt fit.

 

Yeah Ill try it thanks. Wha size lift did u put in?

 

With 285's youll rub on full turns on the frame, i would get a wheel with a 4" backspace or less

 

http://www.tacomaworld.com/forum/wheels-tires/12697-tire-size-tool.html