deck plate mod

Any auto parts store should have it.

 

Any reputable auto parts store should carry it.

 

My Wal-Mart had it on the aisle with engine additives.

 

I also took out my elbow today. Should I replace the elbow before I put a 4" DP in the front of the box?
Thanks!!

 

Where do you find these plates and what size 4 a 98 2.7 ??

 

Ebay $8

 

you'll want a 3" or 4" deckplate

just browse the interwebs, you'll find one for cheap

 

is it a absolute must to use the sensor safe sealant or can i use silicone caulking

 

Yes, so that your MAF won't set off a CEL when you drive around. You can pick up the stuff from any auto parts store.

 

Sorry man haven't been on in awhile. I have a 2.4 in mine and the airbox is the same as in the 2.7. I fit a 4" in mine. Click on the link in my sig if you want to see the pics. I used a jig saw to cut it out... didn't have the right attachments for the dremel to use it. I also took out the silencer. It doesn't gain you anything on paper but the silencer removal gives you a lot more noise, a good growl if you put the hammer down under load. I was very happy with mine, even gave me 2-3 mpg.