Can't find the "empty" plug for the led/GB sensor.

I have an 04 dc with keyless. I have done the DIY alarm mod (unplugging the single pin connector under the dash) But I ca not find the wire to hook up the LED/GB sensor. How can I see if my taco came with it? Thanks in advance,

Another Noob.

 

http://www.customtacos.com/tech/index.php?article=12

Here are a couple of links that may help you out.

 

Yeah, I saw those but I do not see the plug for the glass break and led.

 

another way to tell if you have the GB Sensor is looking on your dash do you have the sensor in the dash?

 

I believe he's looking for the plug under the dash so he can install the LED/GB sensor

 

oh i thought he ask if anyone could tell him if he already had one in his truck.

 

In the pics of the install I found on ct.com it shows a "third" piece of tubing going thru the white ring under the steering wheel and turning back to the left. I do not see that third set of wires that is supposed to be a blk, wht, and 2colored ones for the gb and led.

Thanks again for helping out another noob.

 

Sorry to bump this thread from over 4 years ago but I'm looking to see if anyone has more info on this. I too am missing the "third" piece of tubing that the OP is talking about.

With the already free factory alarm upgrade, I'm anxious to get my LED and glass break sensor module all hooked up