RPM tachometer For A 96 Tacoma

RompHard · 01-18-2007, 03:07 AM

I have a 96 tacoma 2.4l 5 speed with just the stock gauges and it has no rpm tachometer and I want to figure out if it is possible to hook one up and if so any suggestions will help. COST, BRAND, INSTALLATION INFO, TROUBLE SHOOTING ETC.

twoarezee · 01-18-2007, 02:40 PM

autometer makes a nice 2 5/8" and a 3" tach. they go for less than $100 and are pretty decent.or you can go to autozone and pick up a $30 sunpro tach. installation is pretty straight forward: 12v power, ground, lights and tach signal wire which is located behind the glovebox. the instructions usually tell you exactly what wire is needed for the tach signal.

twoarezee · 01-20-2007, 03:40 PM

i forgot to say that you can get an oem cluster with a tach out of another tacoma of the same year with a 4cyl. motor and transplant it into your truck. like a 3rz powered 4x4 5 spd or sr5 tacoma with 4cyl.

01-18-2007, 03:07 AM	#1
RompHard Junior Member Joined: Jan 2007, #741 Location: Corona,CA Age: 24 Posts: 9	RPM tachometer For A 96 Tacoma I have a 96 tacoma 2.4l 5 speed with just the stock gauges and it has no rpm tachometer and I want to figure out if it is possible to hook one up and if so any suggestions will help. COST, BRAND, INSTALLATION INFO, TROUBLE SHOOTING ETC.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-18-2007, 02:40 PM	#2
twoarezee Senior Member Joined: Sep 2006, #20 Location: esco, ca Age: 24 Posts: 286 00 Dropped Mini 2000 Regular Cab Manual 2rz-fe rims,tires,3"/6" drop, 4x4 front end, 01 tails and corners, prerunner buckets,tenzo r steering wheel w/ momo hub, b&m shifterw/ jdm trd knob, alpine system, tint, 3 3/4" autometer tach, jardine cat back, k&n, debaged, hellwig rear sway bar, kyb monomax shocks, tundra v8 oil filter w/ mobil 1 in ever	autometer makes a nice 2 5/8" and a 3" tach. they go for less than $100 and are pretty decent.or you can go to autozone and pick up a $30 sunpro tach. installation is pretty straight forward: 12v power, ground, lights and tach signal wire which is located behind the glovebox. the instructions usually tell you exactly what wire is needed for the tach signal.

01-20-2007, 03:40 PM	#3
twoarezee Senior Member Joined: Sep 2006, #20 Location: esco, ca Age: 24 Posts: 286 00 Dropped Mini 2000 Regular Cab Manual 2rz-fe rims,tires,3"/6" drop, 4x4 front end, 01 tails and corners, prerunner buckets,tenzo r steering wheel w/ momo hub, b&m shifterw/ jdm trd knob, alpine system, tint, 3 3/4" autometer tach, jardine cat back, k&n, debaged, hellwig rear sway bar, kyb monomax shocks, tundra v8 oil filter w/ mobil 1 in ever	i forgot to say that you can get an oem cluster with a tach out of another tacoma of the same year with a 4cyl. motor and transplant it into your truck. like a 3rz powered 4x4 5 spd or sr5 tacoma with 4cyl.