31x10.50x15 do fit, but rub

Not sure if this is covered but the wheel is a MT classic and the tire is a BFG all terrian, yes they fit fine, but when turning there is a rub sometimes, so it looks like im putting my cheap lift in soon


Ryan

 

what do you have, a 2wd??

I put 31 10.5 all terrains on my truck and they have zero rubbing

i put 265 70 16's on my other wheels, and again, no rubbing..This is all on stock 14 year old suspenison, minus the billy 5100's up front set at stock

 

stock 01 Prerunner, well stock when i put the wheels on earlier today

 

i had both 31/10.50/15's & 265/75/15's on my truck before, no rubbing & it is stock!

 

What size wheels? I got a 16x10 with 265/75s and they rubbed. Had to trim and level the front out. Still rubs some when in a bind, and a little when in reverse (at full lock, but not at full lock when goin forward...weird.)

 

weird, all the same, its going up 2.5 and 1.5 as soon as i can get it into the garage but for some reason it rubs on mine

Ryan

 

whats the backspacing on those wheels?

 

dont forget... 01-04 double cab sits a tad bit lower than the reg cabs and xcabs...

aggressive side wall tires can rub on full articulation without a lift...

been there, done that....

 

My 02 double cab prerunner has 31x10.50r15s on stock wheels and no lift and they fit fine.

 

They are 15x8, ill check it today if i can exact;y where it rubs, all i know is it rubs a little, nothing bad. Dont take this out of context i was just letting people know so when they search for fitment they know that there is some kind of rubbing expecting.

 

That "IS" the stock tire size for a 6 lug, so your good. If you have a 5 lug, then I'm not sure.

 

but ya know, the MT classic in 15x8 is a 3 5/16" backspace, which sticks out quite a bit... if you dont have lift, you may be rubbing outside corner/sidewall against the fender and/or pinchweld...