32x11.5x15 bfg at's on 15x7 any good?

Hello i have a 99 standard cab 4x4 i4. This is my first lift/tire upgrade and any input would be appreciated. I am in the process of installing the 3'' toytec 'ultimate lift.' I also purchased bfg at ko's size32x11.5x15. I was told these would fit with the lift and the stock wheels (15x7). Does anyone see any problems here or have any input. Thanks Matt

 

yea nothing wrong with that, your tire is gona bulge out a bit but that's fine.

 

that will work fine

 

Not too sure about 1st gen, but I run 285/70/17 with some spidertraxx spacers and have the ready lift SST kit so I say you should be fine IMO and from what I've seen on here. Make sure to post some pics

 

Thanks for the quick reply. Will everything fit properly with no rubbing or will i have unusual tread wear bc of the 15x7

 

Thanks for the quick reply. Will everything fit properly with no rubbing or will i have unusual tread wear bc of the 15x7

Thanks for the quick reply. Will everything fit properly with no rubbing or will i have unusual tread wear bc of the 15x7. Will B sure to post pics when completed, new to site sorry bout no pics yet

sorry im new to the whole thread posting thing, never done this before just looking for some info

 

Should fit fine, it might rub on the frame a bit at full lock, but if that's the case you can get a small wheel spacer to fix the problem, or new wheels!

 

Im pretty sure you will be fine I put that same tire but the km's on my 2000 tacoma with a 3' lift and had zero rubbing

 

i was considering 15x8 wheels. but with the backspacing and offset everything just got confusing. if i did go with a 15x8 do you know what i would need?

 

if i was to go up to a 15x8 wheel do you know the backspacing or offset i would need for my 99. and very nice truck i like the cap and the black wheels