Pics of 265/75 r16's on 1st gen

just wondering if anyone could post some pics of their first gens with 265/75 r16's. Doesn't matter about lift or anything, i'm just looking into new tires and wonder if it would still look good with the 32's rather than 33's.

if anyone has a first gen with the 5100's in front set at 2.5" and the 265/75's that'd be ideal

 

of course first pic is before lift, second 2 are after

 

If I were you I'd get 32x 11.50 R15, they are a true 32 (265's are 31.6) and cheap!

 

well i want to stick with my stock rims tho

 

why? you would save enough by going with the 32 1150 15 compared to 265 75 16 that you could afford new wheels.

 

actually on tire rack right now the 265 75 16 bfg A/T are on sale.

 

265 75 16 bfg M/T $198.00
32x11.50R15 bfg M/T $180.00 (and bigger)

that's $18/tire, total of $72 you'll save that you can put toward wheels

wheelers black steel wheels in 15x8 which will fit the tire better as they are wider, are only $59.00/wheel
total of $236.00 - $72.00 that you save on tires and your at $164.

grand total wheels and tires only $884

 

Heres my 04 before and after first pic stock susp with 265/70s on steelies, second pic is ome 880s 265/75s and alloys...

 

No Lift.

 

thanks for all the pics guys, they def still look good and are cheaper than the 285/75 and they would def save me gas money and i would keep most of my power

 

mine rub a little bit, but its not bad at all. Leveling kit i got should take care of it.

 

what type of wheels you have kentucky taco?

 

+ Shipping of course So the 32x11.5R15 s will fit a stock suspension 04 PreRunner? I have been looking at new tires and such (and wouldnt mind getting Black wheels too) - Just don't want to have to do the tires and wheels AND 5100s at the same time for financial reasons

 

They would rub a bit, but spend some time on the pinch weld and you should be fine.

everyone says to just pound the pinch weld flat, that's what i did initially, but I realized it leaves spots to trap water and potentially rust, so I went at mine with the grinder and it's a much cleaner way of doing it. there is also more room with it completely cut/grinded down.

 

Toytec coil overs in front with 2.5 inches of lift in front none in the rear. With 265/75/16 Duratracs. Hope this helps. Sorry for the cell pic.

 

265 75 16 Maxxis Buckshot Mudders on 2.5" lift. Bilstein 5100's.

 

32 11.50 15 Kumho KL78 AT on 2.5 lift Bilstein 5100's.

 

how do you like the 32x11.50's?