Bed Extender With Tonneau Cover?

Trying to find out if I can use a Bed Extender and an Access Limited Cover at the same time. Access website has small blurb about needing 3 inches for the rails of the cover. So, anyone out there using an access roll up cover and bed extender installed?

Thanks,

Bre2tSco2t

04 Double 3.4v6

 

Did you get the cover?

 

I don't have a bed extender, but I can verify that it will need a full 3" on each side(measured from the inside of the bedrail) to accommodate the Access rail

 

The Toyota-branded accessory bed extender conflicts with most tonneaus (but I'm not familiar with the Access tonneau).

 

I did get the Access Limited Cover. I love it, best money spent. I have decided to not bother with a bed extender at this time. Too much trouble, for what I would get out of it. I also got a "BedRug". It works great and keeps things from sliding around in the back pretty good. The sliding issue was one I was hoping the bed extender would help me with. So, all that being said, I think I have a great setup and the only down side is when I need to haul something with the gate down. That’s what ropes and a trailer are for.