1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

new brakes and other for 2004 toyota tacoma

Discussion in '1st Gen. Tacomas (1995-2004)' started by Ben Warren, May 3, 2009.

  1. May 3, 2009 at 4:07 PM
    #1
    Ben Warren

    Ben Warren [OP] Member

    Joined:
    Apr 8, 2009
    Member:
    #15741
    Messages:
    8
    Gender:
    Male
    apopka florida
    Vehicle:
    04 PreRunner
    I have listed the following results from my Toyota inspection report. Does any body here have any advice or suggestions on doing this work on my own and buying the parts somewhere online??

    Inspection Evalutation
    Replace front windshield wiper
    blades

    Check brake/ clutch fluid level/condition Found brake fluid to bedirty/contaminated Perform brake system flush

    Inspect air cleaner element Found air cleaner element to bedirty
    Recommend replacing air filter element

    Inspect ignition wires (spark plugs and
    wires) Found worn out spark plugs Replace spark plugs

    Inspect battery terminals/cables Found battery to be dirty and in
    need of service Service battery

    Inspect/measure front brake pads and
    rotors 3MM or less Replace front brake pads and rotors
    Inspect/measure rear brake linings and drums/rotors
    • 3 MM or less (pads)
    • Below minimum thickness
    (shoes)
    • Found rear brakes dirty/out of
    adjustment
    Clean and adjust rear brakes
     
  2. May 3, 2009 at 4:09 PM
    #2
    tacomaman06

    tacomaman06 Carolina Alliance: Enforcer

    Joined:
    May 1, 2007
    Member:
    #1475
    Messages:
    26,212
    Gender:
    Male
    First Name:
    Will
    York,South Carolina
    Vehicle:
    '16 Tundra TRD Pro
    getting there....
    anyway you can make the font a bit bigger....kinda hard to read.
     

Products Discussed in

To Top