OME lift options

Did someone say OME lift? I got this sittin in my living room. OME with 885s with 15mm spacers and Dakars and OME rear shocks and TC UCAs and those are KM2 305s . Everything will be put on in about 1 week once I get my front and rear from Relentless. I just saved up and decided to do everything at once.

Edit: the KM2s are wrappin all black Raceline 887 Rockcrushers with 3.6" backspacing = bad ass f***ing wheels.

 

Here you go pics with the rear of the truck at least 2.5' up on a snow bank and still , at list 1/4 " space between the cab mount and the tire.
No matter how I turn the wheel there is no contact. Most (99%) of the guys will never flex theirs truck this way. Proof that, pending on the tire,,,, it can be done with 884's only.

 

Thanks!! Bridgestone measures those at 32.8" in a 285-75-16. I have wheels with 4.5" BS and 0* offset. I shouldn't have any trouble running a 285-75-16 with my ARB bumper and OME 886 springs and Dakar leafs? Do you have any measurements from the center of hubs to bottom of your fender?

 

22" on the right hand side and 21 3/4 on the left side. Even with the 5mm spacer and there still 1/4" lean to the left.
Yes the Revo 285 run on the small side but this is what I like about it. They complete the truck and I don't have to put up with the rubbing issues.

 

Nice now install it and post some pics!

 

pics will be comin for sure