06 stormtrooper

decided i wanted to have my DTRLs like all the new ones so i just did a little cross wiring (aka tweet work). turned out pretty good

 

Are those headlights aftermarket or did you do the mod with some factory ones?

 

i did the lighting mod with the stock wiring harness, but i had to get some aftermarket ones cause a yr ago two of brackets on the light shroud were cracked. but i knw most people do the DIY black headlights

 

How did you wire those up?

 

i just cut the wires about 3 in from the connector to the lights. then spliced the connector from the blinkers to the emergency flashing wires, after that i spliced the wires for the DTRLs/turn signals to the connector that fits in the emergency flashes position. its pretty easy just make sure that your power and ground wires and hooked up to the right wires before you complete everything. i just turned on the blinkers and touched the wires till they worked in the right order. ill put some pics up in a bit so you can see.

 

idk if the wiring harness is the same for the access cab as it is for the dbl cab. but this is wat my wires look like. the two connectors both look the same.

here is wat it looks like on the right side

and this is wat the wires look like on the left side

 

looking good
I love that pic with the helio in the background

 

thanks kyle. thats where i was my truck at, we have endless hot water to wash the planes. so they let us wash our trucks there on the weekend. how you liking seattle?!?! is there a Brandon Adams on your boat?

 

here are some night shots for ya. i had to wait till midnight for there to be enough darkness to do it and i just turned it on in my garage.

just DTRLS

just the light bar


from the front

 

Aww that's nice they let u do that. Seattle is getting better I've been here officially a month now but Im glad i got my Tacoma to drive away from the boat i would have shot myself already if I couldn't leave lol. Mm I know there is a SN Adams and he is on the Gm, A-school list haven't really learned first names yet is that him?

 

hahah ya i didnt have a truck for like 6 months. i sold my last taco before i left for boot..... i still miss that truck. ya sn adams is my buddy from back home i got his brother in to the CG, then he decided to join after us. we all went to High School together.

 

Looks super bright up close. Does it throw light down the road/trail pretty well?

 

Nice what's ur name again?

 

ya its pretty decent. it doesnt throw as far as the HIDs did but thats ok i have some that im going to put back in my headlights. it has the opposite throw pattern than the Rigid. This one is 60 flood/ 40 spot, the rigid is the opposite. till way better than paying $1000 for a LED light bar this one was around $400.

coby mason

 

talk about going to big kid Toys R Us!!!

 

Dewalt bits are junk.

 

Ya well they we half off! You can't beat only pay 20 bucks for that whole set

 

Nice! I have the angle grinder and recip saw and they work great.

When the heck did you end up in AK? Last I checked you were in CA. How are you adjusting to the weather? Is there good wheeling around you?

 

looks good!

 

Copycat!












J/k j/k, lol How's K-Dak 5 treatin ya?