1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Fire's Toy

Discussion in '2nd Gen. Builds (2005-2015)' started by Fire931, Feb 17, 2009.

  1. Feb 18, 2009 at 9:21 AM
    #41
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Man, I love that rear bumper! Mind if I ask how much it set you back?
     
  2. Feb 18, 2009 at 9:22 AM
    #42
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    OOooo, like the new rear bumper too!

    I'm having trouble with that second pic though...
     
  3. Feb 18, 2009 at 9:24 AM
    #43
    Wren

    Wren Well-Known Member

    Joined:
    Sep 28, 2008
    Member:
    #9537
    Messages:
    589
    Gender:
    Male
    First Name:
    Josh
    Williamsburg, Ky
    Vehicle:
    11 White Reg. Cab 4x4
    :drool: very, very nice truck
     
  4. Feb 18, 2009 at 9:26 AM
    #44
    Fire931

    Fire931 [OP] Well-Known Member Vendor

    Joined:
    Jan 18, 2009
    Member:
    #12687
    Messages:
    3,237
    Gender:
    Male
    VA
    Vehicle:
    00 4Runner
    not sure why but the second pic wouldnt work so i changed it. first bumper was produced by a guy on TTORA that goes by overkilleng i think. mine was the prototype, but he has been selling thim since. however i have noticed lately that he has been falling way behind on orders, not sure whats up.
     
  5. Feb 18, 2009 at 9:30 AM
    #45
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Who built your second bumper?
     
  6. Feb 18, 2009 at 9:31 AM
    #46
    Fire931

    Fire931 [OP] Well-Known Member Vendor

    Joined:
    Jan 18, 2009
    Member:
    #12687
    Messages:
    3,237
    Gender:
    Male
    VA
    Vehicle:
    00 4Runner
    me, myself, and I.. it was a group effort! :D
     
  7. Feb 18, 2009 at 9:33 AM
    #47
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    I'll take two please. Thank you.

    :D Nice job!!

    And while I have the fiberglass tonneau, that tire gate is REALLY growing on me...
     
  8. Feb 18, 2009 at 9:35 AM
    #48
    Fire931

    Fire931 [OP] Well-Known Member Vendor

    Joined:
    Jan 18, 2009
    Member:
    #12687
    Messages:
    3,237
    Gender:
    Male
    VA
    Vehicle:
    00 4Runner
    its pretty nice. the angled version like mine still allows "some" view using the rearview mirror. my only complaint is i wish they would have designed it to use a latch to hold it closed instead of the two pins. would just make opening and closing it faster and easier. guess i'm just lazy. and i have considered reproducing the high clearance bumper just not sure how well it would sell.
     
  9. Feb 18, 2009 at 9:37 AM
    #49
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    I really like it, I'm just scared of cutting my bed side up. Demello makes a really nice one too - but you gotta cut the bed.
     
  10. Feb 18, 2009 at 9:40 AM
    #50
    Fire931

    Fire931 [OP] Well-Known Member Vendor

    Joined:
    Jan 18, 2009
    Member:
    #12687
    Messages:
    3,237
    Gender:
    Male
    VA
    Vehicle:
    00 4Runner
    i was a little unsure at first. i did the cuts at the firehouse and had a crowd of about 15 people watching in amazement :D i just figured i would crush the bottom of the bedside eventually anyways so why not get it out of the way and put some protection there. plus i think it looks badass! :p
     
  11. Feb 18, 2009 at 9:41 AM
    #51
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Agreed! It does look awesome!

    :thumbsup:
     
  12. Feb 18, 2009 at 9:43 AM
    #52
    Fire931

    Fire931 [OP] Well-Known Member Vendor

    Joined:
    Jan 18, 2009
    Member:
    #12687
    Messages:
    3,237
    Gender:
    Male
    VA
    Vehicle:
    00 4Runner
    Thanks!


    so lets see..... whats next. hehehehe
     
  13. Feb 18, 2009 at 9:48 AM
    #53
    Fire931

    Fire931 [OP] Well-Known Member Vendor

    Joined:
    Jan 18, 2009
    Member:
    #12687
    Messages:
    3,237
    Gender:
    Male
    VA
    Vehicle:
    00 4Runner
    on to the most recent and most involved undertaking. after speaking with Jim at Inchworm Gear i decided i wanted to go slow..... real slow. :cool: so i ordered up a pretty new Lefty tcase and crawler box. the front box has 2.28:1 gears while the tcase now sports 4.7:1. this gives me a final crawl ratio of 166:1 in compound low! :D it required some modifications to multiple parts of the truck but it was well worth it. i havnt quite finished the interior shifter boots yet, still waiting on parts. but you get the idea.

    100_0041_b4286e4518b721624af81d06cc5e112da67ff278.jpg

    100_0042_48384c6bd2520fcc67b4e8d190042b53ef132cf1.jpg


    now you can see that the tcase no longer hangs below the frame rails. it is "clocked" up. soon i will be rerouting the exhaust and building a new crossmember which wont hang down below the frame.

    100_0046_3bea8c97cce18ada7d64c4fe88fe222ba85971bf.jpg
     
  14. Feb 18, 2009 at 9:51 AM
    #54
    Fire931

    Fire931 [OP] Well-Known Member Vendor

    Joined:
    Jan 18, 2009
    Member:
    #12687
    Messages:
    3,237
    Gender:
    Male
    VA
    Vehicle:
    00 4Runner
    and a shot of the shifters. as stated before im still not done with the leather boots. also you can see the switch for operating the winch line next to the cupholder.

    100_0070_021793c69de682b3511b01b0828782eb054010e0.jpg
     
  15. Feb 18, 2009 at 10:04 AM
    #55
    Fire931

    Fire931 [OP] Well-Known Member Vendor

    Joined:
    Jan 18, 2009
    Member:
    #12687
    Messages:
    3,237
    Gender:
    Male
    VA
    Vehicle:
    00 4Runner
    as far as the other small goodies on the truck. i have 6 rock lights under the truck, a rear view camera, another camera on order that i will mount in the front bumper for self spotting offroad, led bed lights, blue led floor lights, weather tech floor liners, cobra cb, scangauge, and i'm sure a few other tid bits that i just cant think of at the moment. heres a few pics of my switch installs to control everything.

    100_0072_129046a40c9f1f361858732d194d075bc1adf14e.jpg

    100_0071_54700dbc1939674a1579996853b2060458b45c38.jpg
     
  16. Feb 18, 2009 at 10:13 AM
    #56
    Delmarva

    Delmarva Mayor of TW

    Joined:
    Oct 22, 2008
    Member:
    #10148
    Messages:
    36,628
    Gender:
    Male
    First Name:
    Mike
    Tucson, AZ
    Vehicle:
    2013 4runner Limited Looking for a Taco
    It's the wife's T4R so it's stock
    He just sold a "second" on ebay for the 05+. I've been chatting with him a bit about rear bumpers... He's local to VA and owns a mobile welding business... :thumbsup:

    same guy right? He had a pic of your truck in his ebay ad.
     
    This site contains affiliate links for which the site may be compensated.
    #56
  17. Feb 18, 2009 at 10:15 AM
    #57
    Fire931

    Fire931 [OP] Well-Known Member Vendor

    Joined:
    Jan 18, 2009
    Member:
    #12687
    Messages:
    3,237
    Gender:
    Male
    VA
    Vehicle:
    00 4Runner
    yea. he's a nice guy. just seems a bit slow getting things turned out.
     
  18. Feb 18, 2009 at 10:24 AM
    #58
    Ghost96Romeo

    Ghost96Romeo What is the Search Tab for????

    Joined:
    Oct 24, 2008
    Member:
    #10228
    Messages:
    1,961
    Gender:
    Male
    Texas
    Vehicle:
    06 TRD Off-Road D-Cab
    3" Pro-Comp Suspension Lift AAL Rear w/TSB, All-Pro Plate Bumper, Lightforce 240 Blitz lights, Lund Genesis Roll-top Bed cover, K&N Filters, Spidertrax Wheel spacers, Built-by-Me Rock Sliders, Jeep Tow-Hook, Black Leather seats, 48"Hi-Lift Jack mounted in the bed, Blacked out TRD Rims, BHLM, FLM..... and Awesomeness
    Oh MY Gawd!!!!!!!!!!!!

    I love it man....:popcorn:
     
  19. Feb 18, 2009 at 10:30 AM
    #59
    Fire931

    Fire931 [OP] Well-Known Member Vendor

    Joined:
    Jan 18, 2009
    Member:
    #12687
    Messages:
    3,237
    Gender:
    Male
    VA
    Vehicle:
    00 4Runner
    Thanks
     
  20. Feb 18, 2009 at 10:37 AM
    #60
    LonghornTaco

    LonghornTaco Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Where'd you mount the CB?
     

Products Discussed in

To Top