Kyouto42's Build

2010 TRD Off-Road 4x4 Double Cab, Black Sand Pearl: "Gypsy Danger" (Updated December 2nd, 2015)

Current setup picture:


Mods Currently Installed -
Interior:
- Wet Okole Seat covers (Charcoal/Black with Black head rests, black/red TRD Off-Road logo, no piping, center console cover, both seats have pockets)
- Weathertech floorliners (black)
- Ultragauge
- Light up 4x4 switch
- Plastiderp'd some interior, will do actual black out painting.
- Kenwood KDC (will update, forget off top of my head lol)
- Metra double-din adaptor
- TATO adapter + steering wheel controls

Communications:
- Cobra 75 CB
- 3' Firestik Antenna

Armor:
- AllPro front bumper with lightbar and shackles (first generation bumper)
- AllPro IFS skid plate (second generation)
- AllPro transmission skid
- AllPro Rear Bumper + Side skirts (sides still need install)
- AllPro Transfer Case/Exhaust skid
- Avid Off-Road Hybrid DOM Sliders with kickout
- Boztec Rear Diff skid (Powdercoated at AZ Powdercoat)
- Pre-runner style tire gate with full matched spare

Recovery:
- HiLift mounted to a bed bar
- Fire Extinguisher + quick release mount (from SDHQ)
- TJM shackles mounted to all four points on AllPro bumpers.
- ARB Recovery kit
- Warn VR-8000 Winch
- Harbor Freight (beater) recovery strap

Exterior:
- Rear Diff breather mod (to gas area)
- Debadged
- Chrome grill painted BSP and satoshi (need to redo it at some point though)
- In-channel window visors
- Stickers: AllPro on rear window and IFS skid, Tread Lightly sticker on rear window, SDHQ (rear window), Toyoda (rear window), ICON,

Suspension/Tires:
- Icon CDC 2.5" Remote Resi coil-overs front with 700lb Springs
- Total Chaos UCA's (stock length)
- Total Chaos Race LCA (stock length)
- Wheeler's Superbumps on front
- Icon Hydro Bumps rear
- Icon 2.5" CDC remote resis on the rear
- AllPro Expedition leaf pack
- AllPro U-Bolt Flip Kit
- ProComp 7089 16" with 4.5" backspace (including spare). TPMS mounted
- Hankook Dynopro MTs, 315/75/R16 on all 5, black-out
- Shanked wheel locks on all corners
- 930 Bates CV boots (inner)
- Synergy 1.5" hub-centric spacers

Performance:
- AFE Si2 CAI with Pro 5 S and pre filter
- Every oil change: Mobile 1 Synthetic with a K&N oil filter
- TRD Catback
- Doug Thorley long tube headers
- AFE Stage 2 si intake (with Prodry S filter and pre-filter installed)
- URD O2 Simulator
- Stainless steel brake lines

Lighting:
- BHLM (Anzo)
- Lifetime LED's for headlight bulbs
- Rear Blitzpro dust lights ( http://blitzpro.com/amber-led-dust-light.html )
- LED license plate lighting (Autozone strips)
- LED replacement backup lights
- 50" Rigid E-Series on roof (all spot, Sierra Expeditions mounts, whistle isolators from Rigid)
- 20" Rigid E-Series on bumper
- Vision-X Amber pods on bumper
- Interior LED's for all lighting

Mods to Install/complete (Have on hand):
- ARB Onboard air
- BlueSea fuse box + breaker
- Vision-X Tarantula rock light system
- Underhood LED lighting
- Bedside LED lighting
- Maglite holder
- Satoshi Grill

Mods for future consideration:
- Ham radio setup
- NST lightweight pullys
- Modify y-pipe to eliminate drop
- Storage setup of some type for recovery gear
- Bed rack with "x brand here" ARB style roof tent. Also want to have fuel/water storage built into it, recovery gear, and such.
- Sound deadening
- Dual batt?
- Under bed storage modification? (Thinking for some basic tools or something, possibly open and lock via the top side of the bed)
- Secondary front shocks (plus upper mount)

Current work needed (more for my notes):
- Wire aux lights and create switch panel in cab
- Inspect a/c compressor (suspect clutch is failing)
- Repolish/repair exhaust tip
- Dump exhaust over axle with exhaust tip relocation
- Install Vision X ambers
- Switches (front amber/rear amber/50"/20"/Rock/bed/usb charging)
- Black paint for some trim pieces
- Repaint/Repowdercoat armor
- Repair wheel speed sensors
- Install bike mount
- Install Shovel quick mounts
- McNeal bedsides
- Repaint or bedline entire truck

 

Pictures



First time out in the dirt to test 4x4 components (nothing serious lol)



Rear Diff breather install location:


AllPro Front Bumper installed:


Firestick and reciever hitch (taken at 2010 ATOM):


Front shackles:


Sunday, October 31st, 2010
Installed Wet Okole's front/rear.

• 
  [li]Charcoal Center (#11)[/li]
  [li]Black Head Rests[/li]
  [li]Center Console Cover installed properly[/li]
  [li]Front/rear[/li]
  [li]Front "TRD OFF ROAD" logo with TRD in black, OFF ROAD in red. Really wanted it all black but it's all WO had...[/li]

Now my interior is weather resistant I just need to do the arm rest mod and relocate the Cobra 75 connection from the center console to the last remaining open switch spot in the center of the dash below the A/C controls (next to A-TRAC and AUX).

[hr]
Previous whip (RIP) (2008 TRD Off-Road PreRunner, totalled out due to another running a red light):



New images (after lift/tires):






















Front will probably be leveled out after I get back to AZ. I need to pick up some spanners and I want to allow the suspension to settle first.

April 23rd, 2011 Update -
Stuffed the full sized spare in last night. Had to cut off the two retention tabs from the stock setup, and then I have to pull on the wheel with my feet toward the back and lock it in at a slight angle to clear the diff. It works though, barely!







Thursday, November 10, 2011
There's been some updates, been lagging behind on updating lol. Avid Offroad DOM hybrid kick sliders for one, AllPro rear bumper, new shackles from Sierra Expeditions, and I had to move the tire into the bed as it didn't clear with the new rear bumper. Oh, and I got rear ended...








This is what happens when a Silverado fails to stop at a red light at around 15-20mph.

 

reserved 2

 

nice truck man

 

great start Jake

 

Thanks guys, it's getting there

 

Before I read the title on the last pic, I thought your truck shrunk. hahaha.
Nice truck.

 

Looks like a great build. Your truck gots potential and i know it will be pulling me out of some sticky situations on future trail runs.

 

Sweet Truck!

 

Great start man... looking forward to seeing its progress


Pretty soon you''ll have a kicks TW Sticker MOD

 

looks like you have some updating to do

 

Yea, actually my build thread is on another site, I'll redirect to it in the next few days

 

Actually, I just copied it over, first post updated

 

Trucks lookin' MEAN!

 

Thanks Scott, she's getting there PM'd avid for some DOM kick sliders... hopefully I can get those soon.

 

very nice!

 

nice truck man i like it a lot. once you get the front back level it'll be about perfect

 

Thanks man. There will still be some rake with front lower after I get the coilovers adjusted. Unfortunately it's more of a pain than I hoped, since I'm going to have to remove the coils to adjust :mutters: Though before pulling them off I have one more thing to possibly try hah. I do like a little front rake as, I do use it as a truck and I hate the socal bro lean. It should be level around 5-600lbs in the bed though when done.

 

She looks good with the lift and new wheels!

 

Looks great Jake. +rep!