Loaded Taco's Build
2012 Barcelona Red Baja DCSB
As she sits today!
Suspension - Baja Edition
-- TRD Bilstein 9100
-- Eibach 700# Coils
-- TRD Bilstein 5160's
- Tinted Windows (35% up front)
- Line-X Front Skid Plate (Removed and Sold) .
- Color Matched Front Grille (Camel Back Toyota)
- Tow Package
Wheels and Tires
- 17x9 Konig Countersteer
- Wheather Tech Floor mats
- JBL Audio System
- Led Map and Dome Lights
- 20" SR-Series Rigid Industries LED Flood/Spot Combo
- 2 x Rigid Industry Duallies LED White Flood
- LED Reverse Lights
- Led Dome & Map Lights
- Relocated Trailer Plug
- Valentine 1 Radar
- Cobra 19DX CB
-- Pyle PHSP6K 6.3" indoor/outdoor PA.
-- SainSonic ES-606 External CB Speaker
-- 4' Firestick Antenna
-- 18' Fire Flex Coax Cabel w/ fire-ring.
- Custom Auxiliary Fuse Panel
-- Blue Sea Fuse Block
-- Blue Sea 100 Amp Circuit Breaker
- Wireless Warn Winch Controller (Good Product)
- B.A.M.F. Sliders
- Pelfreybilt Front Plate bumper (1/13)
- Full Pelfreybilt skids
-- Transfer Case
-Trailer Hitch (Saved my Rear Bumper in Moab)
- 2 x 20' 16,000 lbs. Straps (http://www.southeastoverland.com/)
- 2 Soft Shackles (http://www.southeastoverland.com/)
- 30' 20,000 lbs. Smittybilt tow strap
- Warn VR 10,000-s - Wireless Remote
- Rugged Ridge Snatch Block
- Hi-Lift Extreme 60" (3.25" cut off to fit in my bed)
- Smittybilt receiver Hitch D-ring
Cut fenders (Happening soon)
ICON UCA's (Happening soon)
Expo Leaf Pack
Rear Bumper w/ swingout
Supercharger (Seems unlikely, but a boy can dream)
35's (Happening soon)
BLHL & Retrofit
OBA & or CO2 tank.
Gas Tank Skid
Suspension To Do (not for at least a couple years):
-- Total Chaos +2" kit.
-- Pelfreybilt Rear shock Relocation.
-- 12" Rear Shocks
Small Projects to do:
Mag light mounts
Day I brought her home. 08/25/12
No more stickers
8) Look at that A$$!
9) I'm leaving this sticker.
11) TRD Badge
Valentine 1 Radar, Blend Mount, (Not hard wired yet)
Storage Under seats - Collapsable shovel From when I had My Ranger - Jack
Behind Seats - Flashlight Holder - Sub
Window Tints (Thanks GF)
Color Matched Grille
Sprayed the skid plate with Line-X!
Got my rockslides Line-Xed and Installed.
I had an accident:( So I ordered a new bumper. 1/13 (Will post pictures soon)
Ordered all the parts to fix it from Camelback Toyota. Their prices are the best! Jorge@CBTParts works for them and is a member here.
1/24/13 Anytime fog light mod. The one that didn't require splicing or electrical skills. I ripped this picture off of this thread and added some comments to it. Original picture by munkeeboi.
Bumper arrived 2/8/2013 Should be sprayed with line-x and installed soon.
2/13/12 Soon! Getting the winch today and installing bumper at the end of the week.
I finely got it!!!!
5/3/13 - CB install
CB is in my center Counsel
Custom Auxiliary fuse panel by tooblutacoma06
PA speaker - I have no legitimate reason for this other than my CB has a port for it and it was easy to wire up.
Pelfreybilt Skid Plates.
IFS, Mid & Transfercase
Relocated my CB antenna and now it works much better.
Relocated my Trailer Light Plug
I won these in the Rock Therapy raffel and got them painted for free by a friend.
Cab mount chop today.
nice truck man! i love those wheels, would like to figure out a way to get a set :spy:
How is the rub with your tires?
sweet build man, those baja's are clean!
Very nice!!! Fellow Baja owner myself. Haven't seen any in the red yet. Did you order or paint your grill. I am thinking about ditching my chrome one as well.
Here is where to get it from.
This truck is dope! I'm really diggin your radar mount spot, that looks awesome and is probably super functioning. Did it come with the mounting hardware or is that custom made?
The radar came with just basic window mount.
The mount I have is called a Blend Mount. I had it from when I had my mustang. They have a valentine or escort version. To "properly fit" there is a slightly bigger version than the one I have that would fit on the Mirror shaft a little better. But obviously mine still works.
It is totally worth it I love having up there. I still need to order a Direct-Wire Power Adapter Kit so I can hard wire it for like $15.
Find that here
There is also a thing called mirror tap you can buy to hard wire it to the mirror. When I bought it the inserts were too big and I sent it back. They might have changed it since so I would call and ask.
if you ever wanna get rid of your TRD badge i'll take it :)
I really like the badge, but if I hit my head on a rock I will let you know. lol
The GIF is of my dog.
Sucks about the accident, I wanna see that bumper on that nice truck :spy:
haha thanks anyway but i WONT hope you hit your head, the GIF made me laugh cool dog and nice truck!
Sick truck bro! Can't wait to see the bumper installed!
How do you like your V1? I would like one but they are by far one of the most expensive radars on the market, worth it?
|All times are GMT -7. The time now is 05:36 PM.|