Hard plastic speaker adapters

It made these and they worked excellent!

For me the fronts has JL C5-650's with the tweeters too.
The rears had JL C2-650x.

These fit everything perfectly. They are made with thick plastic boards I cut out meticulously.

I heard horror stories about ********* which is why I didnt go down that route. They are also a ton of money from them.

I just randomly thought this up but how about $40 shipped. Pay via check, discreet paypal or regular paypal+3%.



*SOLD* *SOLD* *SOLD* *SOLD* *SOLD* *SOLD* *SOLD*

 

What size is the cutout?

 

Cut using the JL paper templates but looks like 5.5" for the f/r and the tweeters a shy of 1.5"

 

So what size components will these fit? The speakers you have listed are 6.5's but up above you say 5.5????

 

The speakers that were in the front ones were JL Audio C5-650's. They are 6.5" woofer, but the under mounting is slightly smaller. generally the woofer expands out at the edges so it may be larger than the hole that is needed.

The rears had JL C2-650x's in them and once again are 6.5" woofer.

So each speaker could be slightly different of course.
You can see from this pic, that the edge of the woofer is 6.5" but of course the hole cant be 6.5" or the entire speaker would just fall through. So the under area is smaller. Of course
http://mediacdn.jlaudio.com/media/m...81c965b8731d1110f461d21ed96a54.jpg?1421996067

 

SOLD.