FS: Procomp Stage II 6" lift

alright here are the pics. http://ronnieswietek.com/taco/procomp_kit

comes with:

- lift spindles
- front coil overs
- rear adjustable mx6 shocks
- both drop brackets
- rear lift blocks
- extended U bolts
- extended front bump stops

and then a bunch of misc hardware. I dont have the add-a-leaf anymore or extended brake lines, but everything is there with the exception of maybe a few bolts. I also have the installation guide which you can also print off the procomp web site. Selling this for $1,000. Local pickup only please (socal)

 

Damn...to bad you aren't local!

 

x2 if you were on the east coast id be getting some money together!!!

 

dam..

 

at this point no...maybe if I dont get any bites on this

 

did you end up rewelding your crossmember ???

 

yeah, while its not the prettiest, its quite functional and strong. You can see it in my build thread, page 3 which at that point was still unfinished. Its boxed around the existing frame now

 

hmmm does it work with a 4x4? i never thought i'd think about putting a 6" on my truck but this looks like a good deal .. minus the maybe missing some bolts haha. . also do you have the top plate for the coilovers or what?

 

It does work with 4x4. Mine is a 4x4. One thing to note on 4x4, you have to cut the cross member up front to fit the drive shaft when the front dif drops. The drop bracket has a new mount for the front dif. I totally forgot about that plate.... There is actually only 1 and its for the drive side. I don't think its totally required. At least I saw no value from it. I can make a new one if you want one. I ended up making a second one myself already anyway. Don't let the bolts thing deter you, I'd say 90% of them are there (and all the big grade 8 ones are there). Lowes or home depot will have the bolts you need, if you need any at all.

 

don't you need the top plates to bolt to the coil bucket though? i confused ha

 

no, its just a coil spacer

 

Now that I think about it, since it is only on the drive side, it may be there to compensate for the weight of the front differential. I may be wrong.

 

oh i think you thought i was talking about a spacer, i was just talking about the top plates that bolt the top of the coilover to the coil bucket since it doesnt have the flat plate design like a normal toyoto strut ya know? but i think i see them in the picture not but not attached to the coilovers. .

 

and do you have any pics of where you have to cut like you mentioned earlier?

 

Ohhh..yeah they are there. Look at the first picture, far right. Sitting in front of each coil over...kinda on the edge of the pic.

Umm I dont have a picture of it cut, but the instructions show it. If anyone has a picture of it on their own truck, feel free to post it here

 

i have a stage one just need some components for stage2 if you decide to ship id take the whole package

 

convince me to come down and buy it ( lower price and help me install it )