AC didn't work after CAI install

Okay guys I got a 2010 DC and I installed a AFE CAI on my truck. Disconnected the battery so the computer could reset and the first time I drove my truck the AC wouldn't blow cold. I tried Everything. I tried different configurations and everything. Shut the truck off and turned it back on and now it works. I didn't change a thing. Anyone else experience this problem. I gave the truck atleast 15 min before i made the assumption the AC wasnt getting cold. Normally it gets cold in a matter of minutes.

Thanks
Jeff

 

with a CAI, youre engine steals all the cold air so the AC wont work









just kidding, sorry i cant help....BUMP

 

I know how the AC works and totally understand that nothing I did affects the AC system really. That is why i threw out there that I disconnected the battery hoping that may be why it didn't work.

 

im sure the AC compressor has a fuse-- have you checked that?? does it sound like a compressor is turning on??

 

All i had to do was turn the truck off and the next time I started it and every other time I started it today it was completely fine. I did nothing to fix the problem. It just sucked cause the drive it wasn't working was the longest drive i took today... LOL as luck would have it

 

+1 on checking fuses and connections. There are no coincidinces. 95% of the time, if it quits while you're working on it, you're the cause.

 

cant be a fuse its working now w/o changing fuses.

 

It probably just needed to reset the 15 mins or so after the computer rebooted. If all is good going forward I wouldn't worry about it, if not back to the dealer for a warranty issue.