light racin uca adjustment setting

I have an '07 TRD OR 4X4, with a 3 inch lift with 285/70/17 MT/R's. OME 885 coils, add-a-leaf and 5100's on all four corners, front's set at 0 of course. I got my LR UCA's in and I am getting ready to install them. I know my caster after the alignment needs to be +2 degrees. Should I set the ball joints at +2 before the install and have the alignment shop zero out the factory setting or set the ball-joint adjustment at zero when I install the UCA's? I searched for about an hour on here with no luck. Any of you guys running these UCA's help is appreciated, thanks.

 

What Chris said.
The "0"/center position is actually +2 degrees over stock.
So your UCAS are adjustable from 0 to +4 degrees.
You tires are almost 33"; I would go with 2.4 on the caster.


http://www.tacomaworld.com/forum/2nd-gen-tacomas/40470-ucas-alignment.html

http://www.youtube.com/watch?v=ykEzU7BbV4U&feature=player_embedded

 

what they said!!!

 

Thanks, guys! I never even thought to check youtube. Preciate the help.