New Truck, New Lift, small issue...

I traded in my old tacoma for a slightly used 2010 (which I love). I had all my parts and wheels ready to be put on before I picked up the truck;

Bilstien 5100's
OME 885's
1/2 inch spacer (I think)
Procomp 7089 on BFG285's
Add a leaf
Total Chaos UCA's

So my dealer did the install but I don't know if having the spacer was a good/bad thing? I read some posts from other people that it was a bad idea to combine the spacer with the OME's (the bilstiens are all set to zero).

The ride is really rough, any little bump at high speed is pretty jarring. Would it help if I removed the spacer? The tires already rub a bit when I turn really sharp so I hope it doesn't make it much worse.

Also, the front really sits up a lot higher then the rear.. not sure if its right.

]

 

I like how it looks

 

I just put a 2" add a leaf in my truck today and it sits WAY higher in the back than yours

 

couldnt you remove the spacer lift and put the billies at the first setting .85?

 

pull the spacer take off the front mud flaps and trim/cut off whatever is rubbing or buy $1400 king coilovers

 

Any pics of the strut and shock up close? It will be easier to figure out what you have

 

Are you sure they didn't forget to add the leaf? The rear looks stock height.

 

Whats the front set at?? 2.5 lol-Bro lean

 

Take the spacer out.

 

Your public profile says your truck is an X-runner , but you have a Sport bedside decal , what's the story ?

Also are you 4x4 ?

 

it looks like they forgot the aal

 

Sure; night pic though

 

You have OME 885's which are made for more weight on the front end, I'm suggesting spacers removed. I would have gone OME 884's if running stock bumper. See how it works for you and let us know!

- Rich

 

heres my truck before the aal

 

It is a new truck, haven't updated profile. Its the 4x2 sport


About the add a leaf, so they did say that when they added the new one they weren't sure what to do with the old one.. I take it the guy didn't really know what he was doing (my toyota dealer service department).

Do they replace the old one or just add to it?

 

Yea get rid of the spacer, are you sure they installed the AAL?? Count how many leafs you have should be four

 

they add to it

Now I'm wondering if they took one out and put in the one you brought them..lol

 

Or you can leave the front and add 1" block to the rear. Should bring the back up a little if you like the 4" lift

 

Think maybe they removed the overload and replaced it with the AAL ?

 

then thats it, they took it out... lol

Thanks guys, so remove spacer and make them put back the stock AAL