Calling all lifted 4-door magnetic grey trucks!!

Have OEM UCAs. So far I don't see the need to change. I purchased the Bilstiens w/ the coil overs already installed with the spacer. This gave me a true 3" lift after the install. Got the nerve to install myself thanks to all of the instructions found on this site. Had to do a little trimming up front to accommodate the 285/70/17s. Was rubbing on the turns.
Trying to get up the nerve to black out the head lights. Putting those suckers in the oven freaks me out just a little.
Yours looks great man. Good luck. Post up when you get done.

 

Damn that is wicked sweet man.

 

thanks!!!

 

Here is mine, need to take some more pictures in the current configuration.

Icon's @ 2 and LR UCA's on the front
TSB only on the back
Demello RockCrusher sliders
Level 8 Guardian wheels
265/70R17 Duratracs
Satoshi
PIAA 540's
Elusive Elements Lightbar
Weathertech in channel rainguards
Debadged
20% tint sides, 50% tint front

 

AAAAHHHH, my eyes!! what is that colorado doing on this forum!! *puke* next time give us a warning!

 

Full OME Suspension with 886's up front with LR UCA's and Dakars out back.





New Grabbers and stock sport wheels.

 

Are these tires the 245/75s or 265/70s?

 

2010 DCLB with the Revtec 3" kit in front, non tsb w/ aal, 2" blocks and airbags.
Stock wheels with Spidertrax spacers all the way around

If I keep it another year I will probably go to a full 6" lift

 

6 inch procomp Nitto Trail Grapplers P295/70R18 with 18 in XD revolvers, oh and bright orange boots!!

 

The stock tires. 245's

 

i apologize if yourve already answered this, just curious because im looking to reshoe my 2012 dc mag grey trd/s after i finish my lift with the cooper discover stt m/t in 295/70r17, looks like it will roughly translate to about the same fit you have if you lift is similar.

are you running 3" in the front on your lift or more, and what kind of cutting or rubbing issues have you run into? thank you for your time.

p.s badass rig by the way! hope mine turns out as well when im done.

 

Both sets of shoes for it.
Running 3" revtek lift.

 

Dcsb! !