Installed Raceling Rengade 6 wheels with 285/70 17 and vibration is super bad

Hey all,

installed some 17x9 Raceline Renegade 6 wheels with 285/70 17 tires and the vibration is super bad,especially above 50+mph..Performance plus tire installed et lugs and hubcentric rings...They mentioned that they could not peform roadforce balancing since the wheel was too big and did the normal laser balance..Can anyone advise what I need to do?

 

Do I need a place that has the Haweka adapter? Anyone in Socal recommend a place?

Thanks in advance

 

it took me about 5 attempts to get mine right!Finally discount tire got it to where the shake is almost gone. Just have them balance it till they get them right. I had to talk to the manager and say I wanted a refund if they could not resolve the issue. Suddenly the shake is gone! I did reward the tech with 12 beverages of his choice and that did not hurt anything.

 

Hey hope you got the problem figured out. If you can, do you have some pictures you can post so I can check it out.
Thanks!

 

It's always a good idea to watch when your tires are being balanced and look for runout as the tire spins. I've rejected a few tires over the years when I spotted that. They will often tell you that the runout will smooth out over time. It won't. If you were unfortunate enough to get a tire with excessive runout, it will never run smooth.