Taco Lean

So I just bought a used Tacoma that already is leaning to the driver side about an inch. I was wondering, if I bought the ultimate lift kit from toytec and installed it would it still be there? Or should I think about getting some type of spacer?

 

http://www.youtube.com/watch?v=VtAj4yAqRpQ

 

The Toytec ULK has adjustable coilovers, you you can crank one side up a little more to correct the lean.

 

I'm an idiot. I didn't even think of the coilovers, alright thanks alot...

 

u gotz to havz the lean!

 

I just got the one 1/4" spacer and threw it on the driver side.

 

+1.

It fixed my lean right up.

 

What about from the back? I can still see the lean is pretty obvious from the back?

 

I do still have a slight lean in the rear too. It's not as severe as it was before the 5100 and driver side spacer lift, but it's evident.

I had seen a vendor on here that makes a very small increments of blocks that bolt above your leaf springs to fix the rear lean. I can't recall their name or the thread I saw them in though.

 

how much do you weigh?

 

Who? Me? 160

Why would that matter? If the truck is leaning without any occupants, it would lean more with a driver, correct?