RPMs don't drop when shifting 4-5th

mclapperton · 09-01-2008, 05:58 PM

I have a manual 5 spd, 2.7l '08 prerunner. It only happens when shifting from 4th to 5th. When I push in clutch, RPMs don't return to idle. They'll stay where ever they were when I went to make the 4-5 transition. Kept clutch disengaged at one point and revs stayed at 3.5k. It will stay there until shifted and clutch engaged or if I give a quick blip to the throttle. Anyone else experience this problem? Seems to be worse at higher elevations. It has done it from day one. No check engine light and other than that it's a great truck. Has 4k miles on it now. Thanks. By the way this is my first post. Lots of great info on here.

BrunesDoesTRD · 09-01-2008, 06:12 PM

Welcome- And I totally dig your avatar.
As far as the shifting- It's odd that you are only noticing it 4 -> 5. It's an emissions thing for the engine to run high for a few seconds max after the clutch to burn out the cylinders....but only seeing it 4 -> 5 is odd....

red06toy · 09-01-2008, 07:21 PM

Quote:

Originally Posted by mclapperton

I have a manual 5 spd, 2.7l '08 prerunner. It only happens when shifting from 4th to 5th. When I push in clutch, RPMs don't return to idle. They'll stay where ever they were when I went to make the 4-5 transition. Kept clutch disengaged at one point and revs stayed at 3.5k. It will stay there until shifted and clutch engaged or if I give a quick blip to the throttle. Anyone else experience this problem? Seems to be worse at higher elevations. It has done it from day one. No check engine light and other than that it's a great truck. Has 4k miles on it now. Thanks. By the way this is my first post. Lots of great info on here.

My truck does it too, you get used to it guess...OVER THE LINE! Mark it zero Donnie.

chevys · 09-01-2008, 08:41 PM

All newer cars and trucks with standard trannys have the hanging rpm issue between shifts. It can be fixed but would take a little experimentation. See this thread for details.

http://www.mach1registry.org/forums/...ad.php?t=18330

I know it works on these cars and I have know of people who have done this mod on 4 cylinder Ford rangers and it worked. If I bought a taco this would be one of the first things I would set out to do because I hate how the throttle does not close completely like a carbed engine. It actually makes it harder to drive smoothly when the rpms hang up imo.

Maybe somebody here could experiment a little and come up with the proper size restrictor plate.

mclapperton · 09-04-2008, 07:45 PM

Thanks guys. I figured I shouldn't worry about this. It's just that my '98 tacoma didn't do this. I've come to expect certain quirks from vehicles and just live with it. Thanks again for the input.

09-01-2008, 05:58 PM	#1
mclapperton Junior Member Joined: Jun 2008, #7028 Posts: 6 prerunner sr5 2008 Access Cab Manual	RPMs don't drop when shifting 4-5th I have a manual 5 spd, 2.7l '08 prerunner. It only happens when shifting from 4th to 5th. When I push in clutch, RPMs don't return to idle. They'll stay where ever they were when I went to make the 4-5 transition. Kept clutch disengaged at one point and revs stayed at 3.5k. It will stay there until shifted and clutch engaged or if I give a quick blip to the throttle. Anyone else experience this problem? Seems to be worse at higher elevations. It has done it from day one. No check engine light and other than that it's a great truck. Has 4k miles on it now. Thanks. By the way this is my first post. Lots of great info on here.

09-01-2008, 06:12 PM	#2
BrunesDoesTRD Just Hanging Out. Joined: May 2008, #7011 Location: Panhandle Florida Age: 24 Posts: 861 08 Red with Graphite Inside 2008 Access Cab Manual 4L V6 Debadge, Tint, LiteRider Tonneau with Locker Handle, 5 Pc Billet Grill-Murdered Out	Welcome- And I totally dig your avatar. As far as the shifting- It's odd that you are only noticing it 4 -> 5. It's an emissions thing for the engine to run high for a few seconds max after the clutch to burn out the cylinders....but only seeing it 4 -> 5 is odd.... __________________ Namaste Brunes

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
living at low rpms	misha1031	2nd Gen. Tacomas	15	08-30-2008 06:28 PM
new truck---rough shifting	nighthawk87	2nd Gen. Tacomas	30	08-27-2008 09:14 PM
Shifting point 07 with auto	jbboater	Technical Chat	0	07-16-2008 07:01 PM
07 Hard Shifting from 1st to 2nd	NomolosTRD	Performance and Tuning	2	08-30-2007 10:35 PM
Not shifting into 5th as soon	CharlieX	2nd Gen. Tacomas	4	08-24-2007 10:22 AM

09-01-2008, 08:41 PM	#4
chevys Junior Member Joined: Aug 2007, #2382 Posts: 14	All newer cars and trucks with standard trannys have the hanging rpm issue between shifts. It can be fixed but would take a little experimentation. See this thread for details. http://www.mach1registry.org/forums/...ad.php?t=18330 I know it works on these cars and I have know of people who have done this mod on 4 cylinder Ford rangers and it worked. If I bought a taco this would be one of the first things I would set out to do because I hate how the throttle does not close completely like a carbed engine. It actually makes it harder to drive smoothly when the rpms hang up imo. Maybe somebody here could experiment a little and come up with the proper size restrictor plate.

09-04-2008, 07:45 PM	#5
mclapperton Junior Member Joined: Jun 2008, #7028 Posts: 6 prerunner sr5 2008 Access Cab Manual	Thanks guys. I figured I shouldn't worry about this. It's just that my '98 tacoma didn't do this. I've come to expect certain quirks from vehicles and just live with it. Thanks again for the input.