1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

CEL on after spark plug change???

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Smoove06, May 1, 2011.

  1. May 1, 2011 at 1:51 PM
    #1
    Smoove06

    Smoove06 [OP] Well-Known Member

    Joined:
    Sep 14, 2010
    Member:
    #43249
    Messages:
    161
    Gender:
    Male
    First Name:
    Alex
    North Phoenix
    Vehicle:
    05 SSM DCSB PreRunner
    Starting From Scratch....again
    So i just completed changing my spark plugs and to my surprise, my CEL came on after i fired her up. Also, she started to shake a lot more than ususal and it seemed like it was misfiring. So I went back under the hood to re-check my work and low and behold, i forgot to put on one of the wire harnesses! So i plugged it back in and now the shaking is gone but my CEL is still on.

    Here are my concerns:
    Did i do any major damage?
    Can i reset my CEL myself?
    Do i need to take it to the dealership to reset it or get my engine retuned?

    Thanks in advance!
     
  2. May 1, 2011 at 1:57 PM
    #2
    Steves104x4

    Steves104x4 Well-Known Member

    Joined:
    Apr 17, 2010
    Member:
    #35468
    Messages:
    15,734
    Gender:
    Male
    First Name:
    Steve
    Buffalo NY
    Vehicle:
    2010 RC 2.7 4x4
    BUCKLE UP! It makes it harder for Aliens to pull you out of your Truck.
    I think if you disconnect the battery for 15-20 seconds you'll be fine.



    Steve
     
  3. May 1, 2011 at 2:05 PM
    #3
    olgzr

    olgzr Well-Known Member

    Joined:
    Feb 6, 2010
    Member:
    #30867
    Messages:
    82
    Gender:
    Male
    Denton, Tx
    If disconnecting the battery does not reset the light, it should go out with 3 or 4 days of normal driving. This is providing that the problem is fixed. Make sure you do not drive it if the CEL is flashing. Also, AutoZone may reset the light for you at no charge.
     
  4. May 1, 2011 at 4:34 PM
    #4
    trd09

    trd09 Well-Known Member

    Joined:
    Jul 20, 2009
    Member:
    #19899
    Messages:
    360
    Gender:
    Male
    First Name:
    Chuck
    NW Ark
    Vehicle:
    17 TRD Pro 6AT
    x2
     

Products Discussed in

To Top