As I previously posted I want an aluminum storage chest that will sit lower then the edge of the bed rails. I also want to secure it. Does anyone know if its possible to get a box wide enough so that I can bolt it to the bed using the original location of the bed bolts.
In other words, buy 2 longer screws than the ones that bolt the bed to the frame, drill 2 holes on the the bottom of the box & run the long bolts from the frame, through the original holes of the bed, & through the bottom of the box. Ofcourse, I will use rubber washers on the bottom of the box so no water enters through there. Also, how many inches is it from the bed wall to the front, bottom part of the wheel well?