1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

07 Taco TPMS DIY ???

Discussion in '2nd Gen. Tacomas (2005-2015)' started by kinfolk41684, May 17, 2011.

  1. May 17, 2011 at 1:29 PM
    #1
    kinfolk41684

    kinfolk41684 [OP] Member

    Joined:
    Mar 28, 2011
    Member:
    #53921
    Messages:
    12
    Gender:
    Male
    Sorry for the dreaded TPMS thread.

    I have trolled around looking at the "ground fix" and am getting two different colors on the wire.

    Is it the pink with black, or the blue wire???

    DOES IT WORK EITHER WAY???
     
  2. May 17, 2011 at 1:59 PM
    #2
    Jerry Bear

    Jerry Bear Well-Known Member

    Joined:
    Feb 23, 2011
    Member:
    #51743
    Messages:
    179
    Gender:
    Male
    First Name:
    Jerry
    Mesquite, Texas
    Vehicle:
    2010 Access Cab
    tint, topper, receiver hitch, trailer wiring, topper lighting, cruise control, intermittent wipers, backup camera, auto-dim mirror
    On a 2007, the wire from the Tire Pressure Warning ECU to the Combination Meter, the wire that turns on the warning light, is blue. It goes from plug T14, pin 6, on the TPW ECU to plug C9, pin 23, on the combo meter.

    On a 2007, the pink/black wire on T14 pin 12 is used for diagnostics of the TPW system and probably for other systems as well. If you ground it, I don't know what will happen.

    The information above is for the 2007. It is not correct for a 2010, and I don't know if it is correct for other years.
     

Products Discussed in

To Top