20" enkei wheels tire size qusetion please help

Yep you do not have it then. The trucks with the tsb have 4 leafs.

Do a search for rear suspension tsp on here and you will find more than you ever want to know.

 

lol yea ive been looking. It dont say on toytecs web site if my stock shocks will work with the blocks or add a leaf anybody know?

 

If your only going up 1" you should be fine and if you don't go off road you might be able to get away with 1 1/2 to 2"

 

lol yea ive been looking. It dont say on toytecs web site if my stock shocks will work with the blocks or add a leaf anybody know?
What do y'all think about the 5100s on the front (1.75" lift) and the add a leaf (2" lift) on the rear? Think it will be to much for 285s ? Will I have to get the front end elided if I put the 5100s on? Again thanks for the help

 

You might be okay with that setup. Do you know the back spacing and the width of the wheels?

 

U have a better guess than I would, I couldn't tell you with out taking them off and measuring them. There factory 20" enkei wheels. Guy said they came off a tundra?
No the truck never Goes off road. Dirt roads at the hunting club is the most off road it gets. I'm just kinda scared the 1.75 on the front and 2" on the rear would be to much. I can't find anyone that's done what I'm talking about with 20" wheels. I'm kinda thinkin I can run a bigger tire with that much lift.

 

They are called Enkei Deep 6's. I believe they are 20x9" with 5" of backspacing. Not positive though.

 

From what Ive read there 20x9.5 and I think 15mm offset they come factory with 295/45/20 and thats what on them now, only came on tundras, I thought they looked really wide on my truck. It might look goofy with a 275 or 285 mm wide tire on a 9.5" wide wheel.

 

If that is the case then they are close to 5.75" backspacing. Sorry I was just going off of memory for the specs.

 

Well I think im going to do the 5100s on the front on setting #3 (1.75 lift) and add a leaf (2" lift) with 295/50/20 there 1.16 taller than the 295/45 thats on it now. I think if I go any narrower than 295 is will look funny. From what Ive seen 295 size tires are out the roof, Im gonna call around tomorrow and get some prices. If there to expensive I will prolly just sell the wheels.

 

Yeah if that wheel is in fact a 9.5" I wouldn't go with anything less then a 295 or it will bulge out your side wall like the Hawaii trucks. It might just be cheaper to sell those and buy new 16's or 17's seeing how much the 295/50/R20's cost.

 

I just put a 3" lift on my truck and I run the same wheels. I have yet to go up in tire size yet. I run a 265-50 now I was looking at some 285's or 295's. U got any pics of your truck?

 

I took the wheels off my truck, tires were to expensive and I thought the wheels were to wide for my truck.

 

I put 285/50-20 cooper zeon on my 07 tacoma(deep 6 enkei's) and they rubbed very little. i actually have the 07 tacoma xsp and my dad has an 06 tundra xsp. they are both 20" enkei's but the backspace is different, so i think mine will rub worse b/c his are deep.